[PATCH 11/11] ARM: dts: stm32: phyboard-sargas and phycore: Add optional interfaces

[Christophe Parant <c.parant@xxxxxxxxx>]

- stm32mp15xx-phycore-som: add NAND device on FMC interface to support
the SoM version equipped with NAND flash instead of eMMC.

- stm32mp15xx-phyboard-sargas: define pinctrl for PWM5, LTDC and DCMI
interfaces used on phyBOARD-Sargas. Those interfaces are not enabled by
default as PHYTEC displays and PHYTEC cameras are enabled and configured
throught device tree overlays.
PWM5 is used for LCD backlight command.

Signed-off-by: Christophe Parant <c.parant@xxxxxxxxx>
---
 .../dts/st/stm32mp15xx-phyboard-sargas.dtsi   | 23 +++++++++++++++++++
 .../boot/dts/st/stm32mp15xx-phycore-som.dtsi  | 16 +++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp15xx-phyboard-sargas.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-phyboard-sargas.dtsi
index 729a97f82538..2f351adc5986 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-phyboard-sargas.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-phyboard-sargas.dtsi
@@ -260,3 +260,26 @@ &usbphyc_port0 {
 &usbphyc_port1 {
 	phy-supply = <&vdd_usb>;
 };
+
+&timers5 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm5: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm5_pins_c>;
+		pinctrl-1 = <&pwm5_sleep_pins_c>;
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_f>;
+	pinctrl-1 = <&ltdc_sleep_pins_f>;
+};
+
+&dcmi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmi_pins_d>;
+	pinctrl-1 = <&dcmi_sleep_pins_d>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi
index 0689967b8c56..23db635c39a1 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-phycore-som.dtsi
@@ -345,3 +345,19 @@ &sdmmc2 {
 	st,neg-edge;
 	status = "disabled";
 };
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "disabled";
+
+	nand-controller@4,0 {
+		nand0: nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+		};
+	};
+};
-- 
2.34.1