Add support for chip power supply and chip reset/powerdown.
Signed-off-by: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
v2:
- rebase on linux-next tag next-20250227
- add acked-by
---
.../bindings/net/bluetooth/nxp,88w8987-bt.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index 04f55fac42ce..97c694f2d70a 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -50,6 +50,14 @@ properties:
description:
The GPIO number of the NXP chipset used for BT_WAKE_OUT.
+ vcc-supply:
+ description:
+ phandle of the regulator that provides the supply voltage.
+
+ reset-gpios:
+ description:
+ Chip powerdown/reset signal (PDn).
+
required:
- compatible
@@ -66,5 +74,7 @@ examples:
device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
nxp,wakein-pin = /bits/ 8 <18>;
nxp,wakeout-pin = /bits/ 8 <19>;
+ vcc-supply = <&nxp_iw612_supply>;
+ reset-gpios = <&gpioctrl 2 GPIO_ACTIVE_LOW>;
};
};
base-commit: be5c7bbb3a64baf884481a1ba0c2f8fb2f93f7c3
--
2.43.0
