Hi Tommaso,
On Wed, 26 Feb 2025 at 16:25, Tommaso Merciai
<tommaso.merciai.xr@xxxxxxxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> The MIPI CSI-2 block on the Renesas RZ/V2H(P) SoC is similar to the one
> found on the Renesas RZ/G2L SoC, with the following differences:
> - A different D-PHY
> - Additional registers for the MIPI CSI-2 link
> - Only two clocks
>
> Add a new compatible string, `renesas,r9a09g057-csi2`, for the RZ/V2H(P)
> SoC.
>
> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> @@ -48,7 +58,8 @@ properties:
> resets:
> items:
> - description: CRU_PRESETN reset terminal
> - - description: CRU_CMN_RSTB reset terminal
> + - description:
> + CRU_CMN_RSTB reset terminal (all but RZ/V2H(P)) or D-PHY reset (RZ/V2H(P))
According to the flowcharts[1] in the RZ/G2L, RZ/V2L, and RZ/G2UL
documentation, CPG_RST_CRU.CRU_CMN_RSTB is the D-PHY reset on all of
them, so I think you can just write "D-PHY reset".
Or "D-PHY reset (CRU_CMN_RSTB or CRU_n_S_RESETN)"?
[1] Section 35. Camera Data Receiving Unit (CRU)
35.3.1 Starting Reception for the MIPI CSI-2 Input
35.3.2.2Stopping the D-PHY (MIPI CSI-2 Input)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
