On Wed, 26 Feb 2025 17:51:21 +0000, André Draszik wrote: > The Maxim MAX77759 is a companion PMIC for USB Type-C applications and > includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C > Port Controller (TCPC), NVMEM, and a GPIO expander. > > This describes its storage module (NVMEM). > > Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx> > > --- > v2: > * drop example as the MFD binding has a complete one (Rob) > > Note: MAINTAINERS doesn't need updating, the binding update for the > first leaf device (gpio) adds a wildcard matching all max77759 bindings > --- > .../bindings/nvmem/maxim,max77759-nvmem.yaml | 32 ++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): Warning: Documentation/devicetree/bindings/nvmem/maxim,max77759-nvmem.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/maxim,max77759.yaml Documentation/devicetree/bindings/nvmem/maxim,max77759-nvmem.yaml: Documentation/devicetree/bindings/mfd/maxim,max77759.yaml See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250226-max77759-mfd-v2-2-a65ebe2bc0a9@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
