Hi Frank,
Am Dienstag, 28. Januar 2025, 22:15:58 CET schrieb Frank Li:
> Add PCIe's msi-map and iommu-map property because i.MX95 support smmu and
> its.
>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx95.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> index 6b8470cb3461a..2cebeda43a52d 100644
> --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -1573,6 +1573,12 @@ pcie0: pcie@4c300000 {
> assigned-clock-parents = <0>, <0>,
> <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
> power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> + /* pcie0's Devid(BIT[7:6]) is 0x00, stream id(BIT[5:0]) is 0x10~0x17 */
> + msi-map = <0x0 &its 0x10 0x1>,
> + <0x100 &its 0x11 0x7>;
Aren't you missing msi-map-mask = <0x1ff>; here? Similar to pcie1.
Either way, with this change PCIe on pcie0 is not working anymore,
regardless of msi-map-mask.
Without msi-map-mask:
> OF: /soc/pcie@4c300000: iommu-map, using mask 000001ff, id-base: 00000100, out-base: 00000011, length: 00000007, id: 00000300 -> 00000011
> OF: /soc/pcie@4c300000: no msi-map translation for id 0x300 on (null)
> r8169 0000:03:00.0: error -EINVAL: enable failure
> r8169 0000:03:00.0: probe with driver r8169 failed with error -22
With msi-map-mask:
> OF: /soc/pcie@4c300000: iommu-map, using mask 000001ff, id-base: 00000100, out-base: 00000011, length: 00000007, id: 00000300 -> 00000011
> OF: /soc/pcie@4c300000: msi-map, using mask 000001ff, id-base: 00000100, out-base: 00000011, length: 00000007, id: 00000300 -> 00000011
> r8169 0000:03:00.0: enabling device (0000 -> 0003)
> r8169 0000:03:00.0: enabling Mem-Wr-Inval
> r8169 0000:03:00.0: error -EIO: PCI read failed
> r8169 0000:03:00.0: probe with driver r8169 failed with error -5
Without msi-map/iommu-map:
> r8169 0000:03:00.0: enabling device (0000 -> 0003)
> r8169 0000:03:00.0: enabling Mem-Wr-Inval
> r8169 0000:03:00.0 eth0: RTL8168g/8111g, d8:9d:b9:00:16:10, XID 4c0, IRQ 166
> r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
> r8169 0000:03:00.0 enp3s0: renamed from eth0
> r8169 0000:03:00.0: enabling bus mastering
> r8169 0000:03:00.0 enp3s0: Link is Down
pcie1 works as expected. But this is only a single PCIe device, rather than
having a PCIe bridge.
Any idea what's wrong here?
Best regards,
Alexander
> + iommu-map = <0x000 &smmu 0x10 0x1>,
> + <0x100 &smmu 0x11 0x7>;
> + iommu-map-mask = <0x1ff>;
> fsl,max-link-speed = <3>;
> status = "disabled";
> };
> @@ -1640,6 +1646,14 @@ pcie1: pcie@4c380000 {
> assigned-clock-parents = <0>, <0>,
> <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
> power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> + /* pcie1's Devid(BIT[7:6]) is 0x10, stream id(BIT[5:0]) is 0x18~0x1f */
> + msi-map = <0x0 &its 0x98 0x1>,
> + <0x100 &its 0x99 0x7>;
> + msi-map-mask = <0x1ff>;
> + /* smmu have not Devid(BIT[7:6]) */
> + iommu-map = <0x000 &smmu 0x18 0x1>,
> + <0x100 &smmu 0x19 0x7>;
> + iommu-map-mask = <0x1ff>;
> fsl,max-link-speed = <3>;
> status = "disabled";
> };
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
