From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
Add a node for the nss clock controller found on ipq9574 based devices.
Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V11:
- Renamed 'nsscc' clock to 'bus'.
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 29 +++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 942290028972..c43cb177ced4 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -1193,6 +1193,35 @@ pcie0: pci@28000000 {
status = "disabled";
};
+ nsscc: clock-controller@39b00000 {
+ compatible = "qcom,ipq9574-nsscc";
+ reg = <0x39b00000 0x80000>;
+ clocks = <&xo_board_clk>,
+ <&cmn_pll NSS_1200MHZ_CLK>,
+ <&cmn_pll PPE_353MHZ_CLK>,
+ <&gcc GPLL0_OUT_AUX>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&gcc GCC_NSSCC_CLK>;
+ clock-names = "xo",
+ "nss_1200",
+ "ppe_353",
+ "gpll0_out",
+ "uniphy0_rx",
+ "uniphy0_tx",
+ "uniphy1_rx",
+ "uniphy1_tx",
+ "uniphy2_rx",
+ "uniphy2_tx",
+ "bus";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #interconnect-cells = <1>;
+ };
};
thermal-zones {
--
2.34.1
