This series adds a driver for the MDIO controller on the RTL9300 family of devices. The controller is a little unique in that we can't access the SMI interfaces directly. This means we need to use the hardware description from the DTS to compute a mapping of switch port to mdio bus/address. The dt-bindings have been applied to net-next. I've dropped a patch that added PHYs to the cameo-rtl9302c board as I know that will need updating once some of the other in-flight changes make it into linux-mips. Chris Packham (2): net: mdio: Add RTL9300 MDIO driver mips: dts: realtek: Add MDIO controller arch/mips/boot/dts/realtek/rtl930x.dtsi | 33 ++ drivers/net/mdio/Kconfig | 7 + drivers/net/mdio/Makefile | 1 + drivers/net/mdio/mdio-realtek-rtl9300.c | 475 ++++++++++++++++++++++++ 4 files changed, 516 insertions(+) create mode 100644 drivers/net/mdio/mdio-realtek-rtl9300.c -- 2.48.1
