Dear Eason,
Thank you for your patch.
Am 21.02.25 um 10:09 schrieb Eason Yang:
Add Nuvoton NCT7201/NCT7202 system voltage monitor 12-bit ADC driver
NCT7201/NCT7202 supports up to 12 analog voltage monitor inputs and up to
4 SMBus addresses by ADDR pin. Meanwhile, ALERT# hardware event pins for
independent alarm signals, and the all threshold values could be set for
… and all the threshold values …
system protection without any timing delay. It also supports reset input
RSTIN# to recover system from a fault condition.
Currently, only single-edge mode conversion and threshold events support.
… are supported.
It’d be great if you added a datasheet name and revision, and, if
publicly available, a URL.
Signed-off-by: Eason Yang <j2anfernee@xxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/iio/adc/Kconfig | 11 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/nct7201.c | 487 ++++++++++++++++++++++++++++++++++++++
4 files changed, 500 insertions(+)
create mode 100644 drivers/iio/adc/nct7201.c
[…]
Kind regards,
Paul
