From: Yadwinder Singh Brar <yadi.brar@xxxxxxxxxxx> This patch adds pinctrl configuration for using configuring gpx3-2 as an external interrupt from max77686. Though max77686 RTC is enabled and gets probed by default, it doesnt work as its unable to get interrupt. This patch makes max77686 RTC work and also configures it as wakeup source. Signed-off-by: Yadwinder Singh Brar <yadi.brar@xxxxxxxxxxx> Reviewed-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> Tested-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> --- Initial version of this patch was part of following series, though they are not dependent on each other, resubmitting after rebasing and detaching second one from first patch in the series [1] [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/303652.html arch/arm/boot/dts/exynos5250-smdk5250.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index bc27cc2..4fe186d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -131,6 +131,9 @@ reg = <0x09>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; voltage-regulators { ldo1_reg: LDO1 { @@ -410,3 +413,12 @@ }; }; }; + +&pinctrl_0 { + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; -- 2.2.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
