[PATCH v2 0/2] reset driver for NXP LPC18xx family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch set adds a reset driver for NXP LPC18xx/43xx devices.

Changes in v2:
* clean up header includes
* prefix M0 reset defines with LPC43XX
* fix comment about M0 reset lines
* reorganize reset call chains
* add reset number table to dt doc

There are no dependencies in this patch set. The DTS changes will
be sent separately to arm-soc once this patch set goes upstream.

Base support for the NXP LPC18xx family can be found here:
http://marc.info/?l=linux-arm-kernel&m=143016894704253&w=2

Joachim Eastwood (2):
  reset: add driver for lpc18xx rgu
  doc: dt: add documentation for lpc1850-rgu reset driver

 .../devicetree/bindings/reset/nxp,lpc1850-rgu.txt  |  84 +++++++
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-lpc18xx.c                      | 258 +++++++++++++++++++++
 3 files changed, 343 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
 create mode 100644 drivers/reset/reset-lpc18xx.c

-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux