On Sun, May 3, 2015 at 7:19 AM, Eyal Reizer <eyalreizer@xxxxxxxxx> wrote: > From: Eliad Peller <eliad@xxxxxxxxxx> > > uart1 is used for shared transport (used for multiplexing > bluetooth and nfc data). add the needed muxes and definitions. > > Signed-off-by: Eliad Peller <eliad@xxxxxxxxxx> > Signed-off-by: Eyal Reizer <eyalr@xxxxxx> > --- > arch/arm/boot/dts/am335x-evm.dts | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > index 0f398fa..5968cde 100644 > --- a/arch/arm/boot/dts/am335x-evm.dts > +++ b/arch/arm/boot/dts/am335x-evm.dts > @@ -135,6 +135,18 @@ > }; > }; > > + kim { > + compatible = "kim"; Who is kim? > + nshutdown_gpio = <117>; /* Bank3, pin21 */ We have a standard way to specify gpios. > + dev_name = "/dev/ttyS1"; Uh, Linux specific. No. > + flow_cntrl = <1>; > + baud_rate = <3000000>; I believe there are standard properties for uarts for both of these. Is any of this documented? Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html