Am Dienstag, 25. Februar 2025, 15:52:54 CET schrieb Rob Herring:
> ********************
> Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie wissen, dass diese aus einer sicheren Quelle stammen und sicher sind. Leiten Sie die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter.
> Attention external email: Open attachments and links only if you know that they are from a secure source and are safe. In doubt forward the email to the IT-Helpdesk to check it.
> ********************
>
> On Mon, Feb 24, 2025 at 03:28:23PM +0100, Alexander Stein wrote:
> > Document the LDB bridge subnode and add the subnode into the example.
> > For the subnode to work, the block control must scan its subnodes and
> > bind drivers to them, do not misuse either simple-bus or simple-mfd
> > here.
> >
> > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> > ---
> > .../soc/imx/fsl,imx93-media-blk-ctrl.yaml | 51 +++++++++++++++++++
> > 1 file changed, 51 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > index b3554e7f9e76d..d914dea6ecbb5 100644
> > --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > @@ -24,6 +24,14 @@ properties:
> > reg:
> > maxItems: 1
> >
> > + ranges: true
> > +
> > + '#address-cells':
> > + const: 1
> > +
> > + '#size-cells':
> > + const: 1
> > +
> > '#power-domain-cells':
> > const: 1
> >
> > @@ -46,9 +54,20 @@ properties:
> > - const: csi
> > - const: dsi
> >
> > + bridge@20:
> > + type: object
> > + additionalProperties: true
> > + properties:
> > + compatible:
> > + contains:
> > + const: fsl,imx93-ldb
> > +
> > required:
> > - compatible
> > - reg
> > + - ranges
> > + - '#address-cells'
> > + - '#size-cells'
> > - power-domains
> > - clocks
> > - clock-names
> > @@ -77,4 +96,36 @@ examples:
> > clock-names = "apb", "axi", "nic", "disp", "cam",
> > "pxp", "lcdif", "isi", "csi", "dsi";
> > #power-domain-cells = <1>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
>
> Given the address below is 0x20, this looks wrong unless the parent
> address is 0.
Thanks for pointing out. Because system-controller@4ac10000 is not
a simple-bus I assume this needs explicit ranges, as you pointed out in
your comment on Patch 4, no?
Best regards,
Alexander
> > +
> > + bridge@20 {
> > + compatible = "fsl,imx93-ldb";
> > + reg = <0x20 0x4>, <0x24 0x4>;
> > + reg-names = "ldb", "lvds";
> > + clocks = <&clk IMX93_CLK_LVDS_GATE>;
> > + clock-names = "ldb";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + ldb_from_lcdif2: endpoint {
> > + remote-endpoint = <&lcdif2_to_ldb>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + ldb_lvds: endpoint {
> > + remote-endpoint = <&ldb_to_panel>;
> > + };
> > + };
> > + };
> > + };
> > };
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
