Il 25/02/25 15:33, Nícolas F. R. A. Prado ha scritto:
The DMIC_GAINx_CUR registers contain the current (as in present) gain of each DMIC. During capture, this gain will ramp up until a target value is reached, and therefore the register is volatile since it is updated automatically by hardware. However, after capture the register's value returns to the value that was written to it. So reading these registers returns the current gain, and writing configures the initial gain for every capture. From an audio configuration perspective, reading the instantaneous gain is not really useful. Instead, reading back the initial gain that was configured is the desired behavior. For that reason, consider the DMIC_GAINx_CUR registers as non-volatile, so the regmap's cache can be used to retrieve the values, rather than requiring pm runtime resuming the device. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
