Devicetree properties describing exactly the same thing should be
reusable between device bindings. All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath12k).
Deprecate qcom,ath12k-calibration-variant and alike, so we gradually
switch to a common property. This will also allow moving these
properties to common schema, if desired.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml
index 318f305405e3b34e66a31bec7460c0a9d020ebc1..589960144fe1d56eb6f15f63a2d594210e045d27 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml
@@ -52,8 +52,15 @@ properties:
reg:
maxItems: 1
+ qcom,calibration-variant:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ String to uniquely identify variant of the calibration data for designs
+ with colliding bus and device ids
+
qcom,ath12k-calibration-variant:
$ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
description:
String to uniquely identify variant of the calibration data for designs
with colliding bus and device ids
@@ -103,7 +110,7 @@ examples:
compatible = "pci17cb,1109";
reg = <0x0 0x0 0x0 0x0 0x0>;
- qcom,ath12k-calibration-variant = "RDP433_1";
+ qcom,calibration-variant = "RDP433_1";
ports {
#address-cells = <1>;
@@ -139,7 +146,7 @@ examples:
compatible = "pci17cb,1109";
reg = <0x0 0x0 0x0 0x0 0x0>;
- qcom,ath12k-calibration-variant = "RDP433_2";
+ qcom,calibration-variant = "RDP433_2";
qcom,wsi-controller;
ports {
@@ -176,7 +183,7 @@ examples:
compatible = "pci17cb,1109";
reg = <0x0 0x0 0x0 0x0 0x0>;
- qcom,ath12k-calibration-variant = "RDP433_3";
+ qcom,calibration-variant = "RDP433_3";
ports {
#address-cells = <1>;
--
2.43.0
