On 24.02.2025 12:37 PM, Md Sadre Alam wrote:
> Enable SPI NAND support for ipq9574 SoC.
>
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> ---
> * Moved out ipq9574-rdp-common.dtsi changes into this patch from
> previous patch
> ---
> .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 43 +++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> index ae12f069f26f..6d1e84301671 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> @@ -139,6 +139,49 @@ gpio_leds_default: gpio-leds-default-state {
> drive-strength = <8>;
> bias-pull-up;
> };
> +
> + qpic_snand_default_state: qpic-snand-default-state {
> + clock-pins {
> + pins = "gpio5";
> + function = "qspi_clk";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + cs-pins {
> + pins = "gpio4";
> + function = "qspi_cs";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + data-pins {
> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
> + function = "qspi_data";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +};
> +
> +&qpic_bam {
> + status = "okay";
> +};
> +
> +&qpic_nand {
> + pinctrl-0 = <&qpic_snand_default_state>;
> + pinctrl-names = "default";
> + status = "okay";
Please add a newline before status
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Konrad
