Move port@0 and port@1 under ports to fix below DTB_CHECK warnings. arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: port@0:reg:0:0: 0 is less than the minimum of 1 from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml# arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'dr_mode', 'phy-names', 'phys', 'port@0', 'port@1', 'snps,parkmode-disable-ss-quirk' were unexpected) from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml# Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- .../dts/freescale/imx8mq-librem5-devkit.dts | 25 +++++++++++-------- .../boot/dts/freescale/imx8mq-librem5.dtsi | 25 +++++++++++-------- 2 files changed, 28 insertions(+), 22 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 9d8e7231b7c63..d9f203c795197 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -979,24 +979,27 @@ &usb3_phy1 { }; &usb_dwc3_0 { - #address-cells = <1>; - #size-cells = <0>; dr_mode = "otg"; status = "okay"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - typec_hs: endpoint { - remote-endpoint = <&usb_con_hs>; + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - typec_ss: endpoint { - remote-endpoint = <&usb_con_ss>; + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index c19ffa8e8a79a..9e0e2d7271efb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -1321,25 +1321,28 @@ &usb3_phy1 { }; &usb_dwc3_0 { - #address-cells = <1>; - #size-cells = <0>; dr_mode = "otg"; usb-role-switch; status = "okay"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - typec_hs: endpoint { - remote-endpoint = <&usb_con_hs>; + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - typec_ss: endpoint { - remote-endpoint = <&usb_con_ss>; + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; }; }; }; -- 2.34.1
