According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
Signed-off-by: Diogo Ivo <diogo.ivo@xxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 63b94a04308e86bd442d6c1d6558bdcf2fc65825..38d49d612c0c19181ec63790112f7a73597b8a82 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1686,7 +1686,7 @@ vdd_1v8_dis: regulator-vdd-1v8-dis {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
- gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&exp1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_1v8>;
};
--
2.48.1
