Hi On 11/02/25 23:48, Robert Nelson wrote: > BeagleBoard.org PocketBeagle 2 is an upgraded version of the popular > PocketBeagle. It is based on Texas Instruments AM6232 SoC. Its dual > A53 cores can provide higher performance than classic PocketBeagle. > The new design comes with pre-soldered headers, a 3-pin JST-SH 1.00mm > UART debug port, a USB-C port, Texas Instruments MSPM0L1105 Cortex-M0+ > MCU for ADC, 512MB RAM, and a LiPo Battery charger. > > https://www.beagleboard.org/boards/pocketbeagle-2 > https://openbeagle.org/pocketbeagle/pocketbeagle- > > Signed-off-by: Robert Nelson <robertcnelson@xxxxxxxxx> > CC: Rob Herring <robh@xxxxxxxxxx> > CC: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx> > CC: Conor Dooley <conor+dt@xxxxxxxxxx> > CC: Vignesh Raghavendra <vigneshr@xxxxxx> > CC: Nishanth Menon <nm@xxxxxx> > CC: Andrew Davis <afd@xxxxxx> > CC: Roger Quadros <rogerq@xxxxxxxxxx> > CC: Siddharth Vadapalli <s-vadapalli@xxxxxx> > CC: Judith Mendez <jm@xxxxxx> > CC: Andrei Aldea <a-aldea@xxxxxx> > CC: Jason Kridner <jkridner@xxxxxxxxxxxxxxx> > CC: Deepak Khatri <lorforlinux@xxxxxxxxxxxxxxx> > CC: Ayush Singh <ayush@xxxxxxxxxxxxxxx> Please run make dtbs_check and fix the reported issues. Eg.: +arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts: /bus@f0000/pinctrl@f4000/main_i2c2-default-pins: Character '_' not recommended in node name [...] > ----- Regards Vignesh https://ti.com/opensource
