On Mo, 2025-02-24 at 13:59 +0800, Ryan Chen wrote:
> Add i2c new register mode driver to support AST2600 i2c
> new register mode. AST2600 i2c controller have legacy and
> new register mode. The new register mode have global register
> support 4 base clock for scl clock selection, and new clock
> divider mode. The new register mode have separate register
> set to control i2c controller and target. This patch is for i2c
> controller mode driver.
>
> Signed-off-by: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/Kconfig | 11 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-ast2600.c | 1036 ++++++++++++++++++++++++++++++
> 3 files changed, 1048 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-ast2600.c
>
[...]
> diff --git a/drivers/i2c/busses/i2c-ast2600.c b/drivers/i2c/busses/i2c-ast2600.c
> new file mode 100644
> index 000000000000..bfac507693dd
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-ast2600.c
> @@ -0,0 +1,1036 @@
[...]
> +static int ast2600_i2c_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct ast2600_i2c_bus *i2c_bus;
> + struct resource *res;
> + u32 global_ctrl;
> + int ret;
> +
> + i2c_bus = devm_kzalloc(dev, sizeof(*i2c_bus), GFP_KERNEL);
> + if (!i2c_bus)
> + return -ENOMEM;
> +
> + i2c_bus->reg_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(i2c_bus->reg_base))
> + return PTR_ERR(i2c_bus->reg_base);
> +
> + i2c_bus->rst = devm_reset_control_get_shared(dev, NULL);
> + if (IS_ERR(i2c_bus->rst))
> + return dev_err_probe(dev, PTR_ERR(i2c_bus->rst), "Missing reset ctrl\n");
> +
> + reset_control_deassert(i2c_bus->rst);
No reset_control_assert() in the error paths below? You could get that
and simplify this by using devm_reset_control_get_shared_deasserted().
regards
Philipp
