On Thu, 20 Feb 2025 16:26:08 +0100, John Madieu wrote: > The Renesas RZ/G3E SoC includes a Thermal Sensor Unit (TSU) block designed > to measure the junction temperature. The device provides real-time temperature > measurements for thermal management, utilizing a single dedicated channel > (channel 1) for temperature sensing. > > Signed-off-by: John Madieu <john.madieu.xa@xxxxxxxxxxxxxx> > --- > .../thermal/renesas,r9a09g047-tsu.yaml | 123 ++++++++++++++++++ > 1 file changed, 123 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.example.dtb: thermal@14002000: reg: [[0, 335552512], [0, 4096]] is too long from schema $id: http://devicetree.org/schemas/thermal/renesas,r9a09g047-tsu.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250220152640.49010-4-john.madieu.xa@xxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
