[PATCH 2/3] dt-bindings: net: fsl,gianfar-mdio: Update information about TBI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "J. Neuschäfer" <j.ne@xxxxxxxxxx>

When this binding was originally written, all known TSEC Ethernet
controllers had a Ten-Bit Interface (TBI). However, some datasheets such
as for the MPC8315E suggest that this is not universally true:

  The eTSECs do not support TBI, GMII, and FIFO operating modes, so all
  references to these interfaces and features should be ignored for this
  device.

Signed-off-by: J. Neuschäfer <j.ne@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml
index 2dade7f48c366b7f5c7408e1f7de1a6f5fc80787..0d2605512c4711a4dcb77620b94ea77a71b45fa8 100644
--- a/Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml
@@ -11,13 +11,12 @@ description:
   connected. For each device that exists on this bus, a child node should be
   created.
 
-  As of this writing, every TSEC is associated with an internal Ten-Bit
-  Interface (TBI) PHY. This PHY is accessed through the local MDIO bus. These
-  buses are defined similarly to the mdio buses, except they are compatible
-  with "fsl,gianfar-tbi". The TBI PHYs underneath them are similar to normal
-  PHYs, but the reg property is considered instructive, rather than
-  descriptive. The reg property should be chosen so it doesn't interfere with
-  other PHYs on the bus.
+  Some TSECs are associated with an internal Ten-Bit Interface (TBI) PHY. This
+  PHY is accessed through the local MDIO bus. These buses are defined similarly
+  to the mdio buses, except they are compatible with "fsl,gianfar-tbi". The TBI
+  PHYs underneath them are similar to normal PHYs, but the reg property is
+  considered instructive, rather than descriptive. The reg property should be
+  chosen so it doesn't interfere with other PHYs on the bus.
 
 maintainers:
   - J. Neuschäfer <j.ne@xxxxxxxxxx>

-- 
2.48.0.rc1.219.gb6b6757d772






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux