From: Fabio Estevam <festevam@xxxxxxx>
According to fsl,dspi.yaml the expected order for describing the dmas
and dma-names properties is "tx" first, followed by "rx".
Adjust it acordingly to fix the following dt-schema warnings:
spi@4002c000: dma-names:0: 'tx' was expected
spi@4002c000: dma-names:1: 'rx' was expected
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
Changes since v1:
- Fixed Subject.
arch/arm/boot/dts/nxp/vf/vfxxx.dtsi | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index 6334ad4aec4b..597f20be82f1 100644
--- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -158,8 +158,8 @@ dspi0: spi@4002c000 {
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <6>;
- dmas = <&edma1 1 12>, <&edma1 1 13>;
- dma-names = "rx", "tx";
+ dmas = <&edma1 1 13>, <&edma1 1 12>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -172,8 +172,8 @@ dspi1: spi@4002d000 {
clocks = <&clks VF610_CLK_DSPI1>;
clock-names = "dspi";
spi-num-chipselects = <4>;
- dmas = <&edma1 1 14>, <&edma1 1 15>;
- dma-names = "rx", "tx";
+ dmas = <&edma1 1 15>, <&edma1 1 14>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -529,9 +529,8 @@ dspi2: spi@400ac000 {
clocks = <&clks VF610_CLK_DSPI2>;
clock-names = "dspi";
spi-num-chipselects = <2>;
- dmas = <&edma1 0 10>,
- <&edma1 0 11>;
- dma-names = "rx", "tx";
+ dmas = <&edma1 0 11>, <&edma1 0 10>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -544,8 +543,8 @@ dspi3: spi@400ad000 {
clocks = <&clks VF610_CLK_DSPI3>;
clock-names = "dspi";
spi-num-chipselects = <2>;
- dmas = <&edma1 0 12>, <&edma1 0 13>;
- dma-names = "rx", "tx";
+ dmas = <&edma1 0 13>, <&edma1 0 12>;
+ dma-names = "tx", "rx";
status = "disabled";
};
--
2.34.1
