Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>
> The jh7110 boards do not have a Rohm DAC on them as far as I
> can tell, and they certainly do not have a dh2228fv, as this device does
> not actually exist! Remove the dac nodes from the devicetrees as it is
> not acceptable to pretend to have a device on a board in order to bind
> the spidev driver in Linux.
>
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Hmm.. I thought we already did this, but it must have been another board.
In any case
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
Thanks!
/Emil
> ---
> CC: Emil Renner Berthing <kernel@xxxxxxxx>
> CC: Conor Dooley <conor@xxxxxxxxxx>
> CC: Rob Herring <robh@xxxxxxxxxx>
> CC: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> CC: linux-riscv@xxxxxxxxxxxxxxxxxxx
> CC: devicetree@xxxxxxxxxxxxxxx
> CC: linux-kernel@xxxxxxxxxxxxxxx
> ---
> arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index dd2eefc295e5..c2f70f5e2918 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -350,12 +350,6 @@ &pwm {
> &spi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&spi0_pins>;
> -
> - spi_dev0: spi@0 {
> - compatible = "rohm,dh2228fv";
> - reg = <0>;
> - spi-max-frequency = <10000000>;
> - };
> };
>
> &syscrg {
> --
> 2.45.2
>
