Hi, this series addresses some DT issues for the TQMa6x, TQMa6ULx and TQMa7x series: * Ordering of nodes * Limiting PMIC rail voltage * Using PMIC rail instead of virtual regulator * Add fixed-partition node to "spi-nor" devices * Adding vcc-supply to "spi-nor" devices Best regards, Alexander Stein Alexander Stein (4): ARM: dts: imx6qdl-tqma6: Order DT properties ARM: dts: imx6ul-tqma6ul: Order DT properties ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor Markus Niebel (5): ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor ARM: dts: tqma6ul: Add partitions subnode to spi-nor ARM: dts: tqma7: Add partitions subnode to spi-nor arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi | 25 ++++++++----------- arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi | 4 +-- .../dts/nxp/imx/imx6ul-tqma6ul-common.dtsi | 11 +++++--- arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 7 ++++++ 5 files changed, 29 insertions(+), 22 deletions(-) -- 2.43.0
