Hi Marc, Thanks for the feedback. > -----Original Message----- > From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> > Sent: 18 February 2025 11:19 > Subject: Re: [PATCH 00/11] Add support for RZ/G3E CANFD > > On 18.02.2025 10:49:50, Biju Das wrote: > > The CAN-FD module on RZ/G3E is very similar to the one on both R-Car > > V4H and RZ/G2L, but differs in some hardware parameters: > > * No external clock, but instead has ram clock. > > * Support up to 6 channels. > > * 20 interrupts. > > > > Biju Das (11): > > clk: renesas: r9a09g047: Add CANFD clock/reset > > dt-bindings: can: renesas,rcar-canfd: Fix typo in pattern properties > > for R-Car V4M > > dt-bindings: can: renesas,rcar-canfd: Simplify the conditional schema > > dt-bindings: can: renesas,rcar-canfd: Document RZ/G3E support > > can: rcar_canfd: Fix page entries in the AFL list > > can: rcar_canfd: Add gen4_type variable to struct rcar_canfd_hw_info > > can: rcar_canfd: Add only_internal_clks variable to struct > > rcar_canfd_hw_info > > can: rcar_canfd: Enhance multi_channel_irqs handling > > can: rcar_canfd: Add RZ/G3E support > > arm64: dts: renesas: r9a09g047: Add CANFD node > > arm64: dts: renesas: r9a09g047e57-smarc: Enable CANFD > > Please send the dts changes as a separate series, too. They will probably go mainline via the renesas > SoC tree. Agreed. Clk, dts as separate series. Cheers, Biju
