Hi Jonas,
On Monday, 17 February 2025 12:08:47 EST Jonas Karlman wrote:
> Hi Detlev,
>
> On 2025-02-17 17:34, Detlev Casanova wrote:
> > From: Stephen Chen <stephen@xxxxxxxxx>
> >
> > The Radxa ROCK 4D board is based on the Rockchip rk3576 SoC.
> >
> > The device tree adds support for basic devices:
> > - UART
> > - SD Card
> > - Ethernet
> > - USB
> > - RTC
> >
> > It has 4 USB ports but only 3 are usable as the top left one is used
> > for maskrom.
> >
> > It has a USB-C port that is only used for powering the board.
> >
> > Signed-off-by: Stephen Chen <stephen@xxxxxxxxx>
> > Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
> > ---
> >
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../boot/dts/rockchip/rk3576-rock-4d.dts | 678 ++++++++++++++++++
> > 2 files changed, 679 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile
> > b/arch/arm64/boot/dts/rockchip/Makefile index
> > def1222c1907e..a112aeb37948a 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) +=
> > rk3568-wolfvision-pf5-display-vz.dtbo>
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
> >
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb
> >
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
> > b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts new file mode 100644
> > index 0000000000000..b499effd50396
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
> > @@ -0,0 +1,678 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/leds/common.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/pwm/pwm.h>
> > +#include <dt-bindings/soc/rockchip,vop2.h>
> > +#include <dt-bindings/usb/pd.h>
> > +#include "rk3576.dtsi"
> > +
> > +/ {
> > + model = "Radxa ROCK 4D";
> > + compatible = "radxa,rock-4d", "rockchip,rk3576";
> > +
> > + aliases {
> > + ethernet0 = &gmac0;
>
> Should mmc alias be added here?
>
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:1500000n8";
> > + };
> > +
> > + leds: leds {
> > + compatible = "gpio-leds";
> > +
> > + power-led {
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_STATUS;
> > + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> > + linux,default-trigger = "default-on";
> > + };
> > +
> > + user-led {
> > + color = <LED_COLOR_ID_BLUE>;
> > + function = LED_FUNCTION_HEARTBEAT;
> > + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
> > + linux,default-trigger = "heartbeat";
> > + };
> > + };
>
> pinctrl should probably be added for the leds above.
>
> > +
> > + vcc_12v0_dcin: regulator-vcc-12v0-dcin {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <12000000>;
> > + regulator-max-microvolt = <12000000>;
> > + regulator-name = "vcc_12v0_dcin";
> > + };
> > +
> > + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1100000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-name = "vcc_1v1_nldo_s3";
> > + vin-supply = <&vcc_5v0_sys>;
> > + };
> > +
> > + vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-name = "vcc_1v2_ufs_vccq_s0";
> > + vin-supply = <&vcc_5v0_sys>;
> > + };
> > +
> > + vcc_1v8_s0: regulator-vcc-1v8-s0 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc_1v8_s0";
> > + vin-supply = <&vcc_1v8_s3>;
> > + };
> > +
> > + vcc_1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc_1v8_ufs_vccq2_s0";
> > + vin-supply = <&vcc_1v8_s3>;
> > + };
> > +
> > + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <2000000>;
> > + regulator-max-microvolt = <2000000>;
> > + regulator-name = "vcc_2v0_pldo_s3";
> > + vin-supply = <&vcc_5v0_sys>;
> > + };
> > +
> > + vcc_3v3_pcie: regulator-vcc-3v3-pcie {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
>
> If I am not mistaken gpios is the preferred property name?
Hehe, looking at the rk3588-rock-5b dts, both "gpio" and "gpios" are used,
I'll use the second one.
> This should probably also have pinctrl props.
Yes, I'll fix all those pinctrl issues.
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc_3v3_pcie";
> > + startup-delay-us = <5000>;
> > + vin-supply = <&vcc_5v0_sys>;
> > + };
> > +
> > + vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc_3v3_rtc_s5";
> > + vin-supply = <&vcc_5v0_sys>;
> > + };
> > +
> > + vcc_3v3_s0: regulator-vcc-3v3-s0 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc_3v3_s0";
> > + vin-supply = <&vcc_3v3_s3>;
> > + };
> > +
> > + vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc_3v3_ufs_s0";
> > + vin-supply = <&vcc_5v0_sys>;
> > + };
> > +
> > + vcc_5v0_device: regulator-vcc-5v0-device {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-name = "vcc_5v0_device";
> > + vin-supply = <&vcc_12v0_dcin>;
> > + };
> > +
> > + vcc_5v0_host: regulator-vcc-5v0-host {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
>
> Same here.
>
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&usb_host_pwren>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-name = "vcc5v0_host";
> > + vin-supply = <&vcc_5v0_device>;
> > + };
> > +
> > + vcc_5v0_sys: regulator-vcc-5v0-sys {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-name = "vcc_5v0_sys";
> > + vin-supply = <&vcc_12v0_dcin>;
> > + };
> > +};
> > +
> > +&combphy1_psu {
> > + status = "okay";
> > +};
> > +
> > +&cpu_b0 {
> > + cpu-supply = <&vdd_cpu_big_s0>;
> > +};
> > +
> > +&cpu_b1 {
> > + cpu-supply = <&vdd_cpu_big_s0>;
> > +};
> > +
> > +&cpu_b2 {
> > + cpu-supply = <&vdd_cpu_big_s0>;
> > +};
> > +
> > +&cpu_b3 {
> > + cpu-supply = <&vdd_cpu_big_s0>;
> > +};
> > +
> > +&cpu_l0 {
> > + cpu-supply = <&vdd_cpu_lit_s0>;
> > +};
> > +
> > +&cpu_l1 {
> > + cpu-supply = <&vdd_cpu_lit_s0>;
> > +};
> > +
> > +&cpu_l2 {
> > + cpu-supply = <&vdd_cpu_lit_s0>;
> > +};
> > +
> > +&cpu_l3 {
> > + cpu-supply = <&vdd_cpu_lit_s0>;
> > +};
> > +
> > +&gmac0 {
> > + phy-mode = "rgmii-id";
> > + clock_in_out = "output";
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <ð0m0_miim
> > + ð0m0_tx_bus2
> > + ð0m0_rx_bus2
> > + ð0m0_rgmii_clk
> > + ð0m0_rgmii_bus
> > + ðm0_clk0_25m_out>;
> > +
> > + phy-handle = <&rgmii_phy0>;
> > + status = "okay";
> > +};
>
> The extra blank lines is probably not needed in above node?
> Props is also not sorted in this node, phy-handle and phy-mode should
> probably be placed next to each other.
>
> > +
> > +&gpu {
> > + mali-supply = <&vdd_gpu_s0>;
> > + status = "okay";
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + pmic@23 {
> > + compatible = "rockchip,rk806";
> > + reg = <0x23>;
> > +
> > + gpio-controller;
> > +
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pmic_pins
> > + &rk806_dvs1_null
> > + &rk806_dvs2_null
> > + &rk806_dvs3_null>;
> > +
> > + system-power-controller;
> > +
> > + vcc1-supply = <&vcc_5v0_sys>;
> > + vcc2-supply = <&vcc_5v0_sys>;
> > + vcc3-supply = <&vcc_5v0_sys>;
> > + vcc4-supply = <&vcc_5v0_sys>;
> > + vcc5-supply = <&vcc_5v0_sys>;
> > + vcc6-supply = <&vcc_5v0_sys>;
> > + vcc7-supply = <&vcc_5v0_sys>;
> > + vcc8-supply = <&vcc_5v0_sys>;
> > + vcc9-supply = <&vcc_5v0_sys>;
> > + vcc10-supply = <&vcc_5v0_sys>;
> > + vcc11-supply = <&vcc_2v0_pldo_s3>;
> > + vcc12-supply = <&vcc_5v0_sys>;
> > + vcc13-supply = <&vcc_1v1_nldo_s3>;
> > + vcc14-supply = <&vcc_1v1_nldo_s3>;
> > + vcca-supply = <&vcc_5v0_sys>;
> > +
> > + #gpio-cells = <2>;
>
> This should probably be sorted next to gpio-controller.
It's not unusual to put # props at the end. but I can move it up if it is
preferred.
> > +
> > + rk806_dvs1_null: dvs1-null-pins {
> > + pins = "gpio_pwrctrl1";
> > + function = "pin_fun0";
> > + };
> > +
> > + rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
> > + pins = "gpio_pwrctrl1";
> > + function = "pin_fun2";
> > + };
> > +
> > + rk806_dvs1_rst: dvs1-rst-pins {
> > + pins = "gpio_pwrctrl1";
> > + function = "pin_fun3";
> > + };
> > +
> > + rk806_dvs1_slp: dvs1-slp-pins {
> > + pins = "gpio_pwrctrl1";
> > + function = "pin_fun1";
> > + };
> > +
> > + rk806_dvs2_dvs: dvs2-dvs-pins {
> > + pins = "gpio_pwrctrl2";
> > + function = "pin_fun4";
> > + };
> > +
> > + rk806_dvs2_gpio: dvs2-gpio-pins {
> > + pins = "gpio_pwrctrl2";
> > + function = "pin_fun5";
> > + };
> > +
> > + rk806_dvs2_null: dvs2-null-pins {
> > + pins = "gpio_pwrctrl2";
> > + function = "pin_fun0";
> > + };
> > +
> > + rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
> > + pins = "gpio_pwrctrl2";
> > + function = "pin_fun2";
> > + };
> > +
> > + rk806_dvs2_rst: dvs2-rst-pins {
> > + pins = "gpio_pwrctrl2";
> > + function = "pin_fun3";
> > + };
> > +
> > + rk806_dvs2_slp: dvs2-slp-pins {
> > + pins = "gpio_pwrctrl2";
> > + function = "pin_fun1";
> > + };
> > +
> > + rk806_dvs3_dvs: dvs3-dvs-pins {
> > + pins = "gpio_pwrctrl3";
> > + function = "pin_fun4";
> > + };
> > +
> > + rk806_dvs3_gpio: dvs3-gpio-pins {
> > + pins = "gpio_pwrctrl3";
> > + function = "pin_fun5";
> > + };
> > +
> > + rk806_dvs3_null: dvs3-null-pins {
> > + pins = "gpio_pwrctrl3";
> > + function = "pin_fun0";
> > + };
> > +
> > + rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
> > + pins = "gpio_pwrctrl3";
> > + function = "pin_fun2";
> > + };
> > +
> > + rk806_dvs3_rst: dvs3-rst-pins {
> > + pins = "gpio_pwrctrl3";
> > + function = "pin_fun3";
> > + };
> > +
> > + rk806_dvs3_slp: dvs3-slp-pins {
> > + pins = "gpio_pwrctrl3";
> > + function = "pin_fun1";
> > + };
> > +
> > + regulators {
> > + vdd_cpu_big_s0: dcdc-reg1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-enable-ramp-delay = <400>;
> > + regulator-min-microvolt = <550000>;
> > + regulator-max-microvolt = <950000>;
> > + regulator-name = "vdd_cpu_big_s0";
> > + regulator-ramp-delay = <12500>;
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdd_npu_s0: dcdc-reg2 {
> > + regulator-boot-on;
> > + regulator-enable-ramp-delay = <400>;
> > + regulator-min-microvolt = <550000>;
> > + regulator-max-microvolt = <950000>;
> > + regulator-name = "vdd_npu_s0";
> > + regulator-ramp-delay = <12500>;
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdd_cpu_lit_s0: dcdc-reg3 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <550000>;
> > + regulator-max-microvolt = <950000>;
> > + regulator-name = "vdd_cpu_lit_s0";
> > + regulator-ramp-delay = <12500>;
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + regulator-suspend-microvolt =
<750000>;
> > + };
> > + };
> > +
> > + vcc_3v3_s3: dcdc-reg4 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc_3v3_s3";
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt =
<3300000>;
> > + };
> > + };
> > +
> > + vdd_gpu_s0: dcdc-reg5 {
> > + regulator-boot-on;
> > + regulator-enable-ramp-delay = <400>;
> > + regulator-min-microvolt = <550000>;
> > + regulator-max-microvolt = <900000>;
> > + regulator-name = "vdd_gpu_s0";
> > + regulator-ramp-delay = <12500>;
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + regulator-suspend-microvolt =
<850000>;
> > + };
> > + };
> > +
> > + vddq_ddr_s0: dcdc-reg6 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vddq_ddr_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdd_logic_s0: dcdc-reg7 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <550000>;
> > + regulator-max-microvolt = <800000>;
> > + regulator-name = "vdd_logic_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc_1v8_s3: dcdc-reg8 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc_1v8_s3";
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt =
<1800000>;
> > + };
> > + };
> > +
> > + vdd2_ddr_s3: dcdc-reg9 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vdd2_ddr_s3";
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + };
> > + };
> > +
> > + vdd_ddr_s0: dcdc-reg10 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <550000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-name = "vdd_ddr_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcca_1v8_s0: pldo-reg1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcca_1v8_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcca1v8_pldo2_s0: pldo-reg2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcca1v8_pldo2_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda_1v2_s0: pldo-reg3 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-name = "vdda_1v2_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcca_3v3_s0: pldo-reg4 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcca_3v3_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vccio_sd_s0: pldo-reg5 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vccio_sd_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcca1v8_pldo6_s3: pldo-reg6 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcca1v8_pldo6_s3";
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt =
<1800000>;
> > + };
> > + };
> > +
> > + vdd_0v75_s3: nldo-reg1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <750000>;
> > + regulator-max-microvolt = <750000>;
> > + regulator-name = "vdd_0v75_s3";
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt =
<750000>;
> > + };
> > + };
> > +
> > + vdda_ddr_pll_s0: nldo-reg2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <850000>;
> > + regulator-max-microvolt = <850000>;
> > + regulator-name = "vdda_ddr_pll_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda0v75_hdmi_s0: nldo-reg3 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <837500>;
> > + regulator-max-microvolt = <837500>;
> > + regulator-name = "vdda0v75_hdmi_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda_0v85_s0: nldo-reg4 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <850000>;
> > + regulator-max-microvolt = <850000>;
> > + regulator-name = "vdda_0v85_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda_0v75_s0: nldo-reg5 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <750000>;
> > + regulator-max-microvolt = <750000>;
> > + regulator-name = "vdda_0v75_s0";
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +
> > + hym8563: rtc@51 {
> > + compatible = "haoyu,hym8563";
> > + reg = <0x51>;
> > + clock-output-names = "hym8563";
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hym8563_int>;
> > + wakeup-source;
> > + #clock-cells = <0>;
>
> This should probably be sorted next to clock-output-names.
Same for # props.
> > + };
> > +};
> > +
> > +&mdio0 {
> > + rgmii_phy0: ethernet-phy@1 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0x1>;
> > + clocks = <&cru REFCLKO25M_GMAC0_OUT>;
> > + reset-assert-us = <20000>;
> > + reset-deassert-us = <100000>;
> > + reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
>
> Pinctrl should probably be added here.
>
> > + };
> > +};
> > +
> > +&pinctrl {
> > + hym8563 {
> > + hym8563_int: hym8563-int {
> > + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO
&pcfg_pull_up>;
>
> This does not match (A0 vs B0) the pin used in rtc@51.
This probably explains the errors I've seen with the rtc.
> > + };
> > + };
> > +
> > + leds {
> > + led_rgb_g: led-green-en {
> > + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO
&pcfg_pull_none>;
> > + };
> > + led_rgb_r: led-red-en {
> > + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO
&pcfg_pull_none>;
> > + };
>
> These are unreferenced and does not match the pin used by gpio leds.
>
> > + };
> > +
> > + usb {
> > + usb_host_pwren: usb-host-pwren {
> > + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
&pcfg_pull_none>;
>
> This does not match the pin used in the regulator.
I'll fix the pinctrl issues, I had to improve my understanding of those a bit
:)
let me know for those # props.
Regards,
Detlev.
