Re: [PATCH 5/6] arm64: dts: qcom: sar2130p: add PCIe EP device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17.02.2025 7:56 PM, Dmitry Baryshkov wrote:
> On the Qualcomm AR2 Gen1 platform the second PCIe host can be used
> either as an RC or as an EP device. Add device node for the PCIe EP.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sar2130p.dtsi | 53 ++++++++++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
> index dd832e6816be85817fd1ecc853f8d4c800826bc4..7f007fad6eceebac1b2a863d9f85f2ce3dfb926a 100644
> --- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
> @@ -1474,6 +1474,59 @@ pcie@0 {
>  			};
>  		};
>  
> +		pcie1_ep: pcie-ep@1c08000 {
> +			compatible = "qcom,sar2130p-pcie-ep";
> +			reg = <0x0 0x01c08000 0x0 0x3000>,
> +			      <0x0 0x40000000 0x0 0xf1d>,
> +			      <0x0 0x40000f20 0x0 0xa8>,
> +			      <0x0 0x40001000 0x0 0x1000>,
> +			      <0x0 0x40200000 0x0 0x1000000>,
> +			      <0x0 0x01c0b000 0x0 0x1000>,
> +			      <0x0 0x40002000 0x0 0x2000>;
> +			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
> +				    "mmio", "dma";

vertical list, please

> +
> +			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
> +				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
> +				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
> +				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
> +				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
> +				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
> +				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
> +				 <&gcc GCC_QMIP_PCIE_AHB_CLK>;

please make sure this one is actually required

> +			clock-names = "aux",
> +				      "cfg",
> +				      "bus_master",
> +				      "bus_slave",
> +				      "slave_q2a",
> +				      "ddrss_sf_tbu",
> +				      "aggre_noc_axi",
> +				      "cnoc_sf_axi",
> +				      "qmip_pcie_ahb";
> +
> +			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global", "doorbell", "dma";

and here

> +
> +			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;

active-only


looks good otherwise

Konrad




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux