[PATCH v2 09/15] ARM: shmobile: r8a7793: add Gose board device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




DT description and Makefile entry for the Gose eval board.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@xxxxxxxxxxx>
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@xxxxxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
Signed-off-by: Kouichi Tomita <kouichi.tomita.yn@xxxxxxxxxxx>
[uli: collapsed BSP revisions into a single commit]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/r8a7793-gose.dts | 534 +++++++++++++++++++++++++++++++++++++
 2 files changed, 535 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7793-gose.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 86217db..03d876f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -492,6 +492,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
+	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
new file mode 100644
index 0000000..713ed03
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -0,0 +1,534 @@
+/*
+ * Device Tree Source for the Gose board
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ */
+
+/dts-v1/;
+#include "r8a7793.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gose";
+	compatible = "renesas,gose", "renesas,r8a7793";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW30";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW31";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW32";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW33";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_E>;
+			label = "SW34";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F>;
+			label = "SW35";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_G>;
+			label = "SW36";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	vcc_sdhi0: regulator@0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator@2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator@3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@4 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator@5 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "i2s";
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&du_pins &usb0_pins &usb1_pins &vin0_pins &vin1_pins>;
+	pinctrl-names = "default";
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	scif1_pins: serial1 {
+		renesas,groups = "scif1_data_d";
+		renesas,function = "scif1";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof0_pins: spi1 {
+		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		renesas,function = "msiof0";
+	};
+
+	msiof1_pins: spi2 {
+		renesas,groups = "msiof1_clk_c", "msiof1_sync_c", "msiof1_rx_c",
+				 "msiof1_tx_c";
+		renesas,function = "msiof1";
+	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data24", "vin0_sync", "vin0_field",
+				 "vin0_clkenb", "vin0_clk";
+		renesas,function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		renesas,groups = "vin1_data8", "vin1_clk";
+		renesas,function = "vin1";
+	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user";
+			reg = <0x00080000 0x00580000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash";
+			reg = <0x00600000 0x03a00000>;
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ak4643: sound-codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
+	eeprom@50 {
+		compatible = "renesas,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie_bus_clk {
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
-- 
2.3.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux