On Fri, Feb 14, 2025 at 03:14:11PM +0100, Dimitri Fedrau via B4 Relay wrote:
> From: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
>
> Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
> Modifying it can be necessary to compensate losses on the PCB and
> connector, so the voltages measured on the RJ45 pins are conforming.
>
> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
