On Sat, 15 Feb 2025 10:39:36 +0100, Artur Weber wrote: > Convert devicetree bindings for the Broadcom BCM59056 PMU MFD from > TXT to YAML format. This patch does not change any functionality; > the bindings remain the same. > > The bindings have been split into two parts: the MFD binding and > a separate binding for the regulator node, to simplify the addition > of other models later (which have different regulators). > > Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> > --- > Changes in v4: > - Made $ref use full schema path > - Cleaned up example > - Dropped regulator name list comment > - Changed description of regulator binding to mention BCM59056 > explicitly > - Changed "Power Management IC" to "Power Management Unit" to match > official Broadcom naming > - Renamed mfd/brcm,bcm59056.yaml to mfd/brcm,bcm590xx.yaml > > Changes in v3: > - Moved regulator node to separate binding > - Removed quotes around compatibles/vbus property > - Style fixes for example > --- > .../devicetree/bindings/mfd/brcm,bcm59056.txt | 39 ---------------- > .../devicetree/bindings/mfd/brcm,bcm590xx.yaml | 54 ++++++++++++++++++++++ > .../bindings/regulator/brcm,bcm59056.yaml | 51 ++++++++++++++++++++ > 3 files changed, 105 insertions(+), 39 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): Warning: Documentation/devicetree/bindings/regulator/brcm,bcm59056.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml Documentation/devicetree/bindings/regulator/brcm,bcm59056.yaml: Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250215-bcm59054-v4-1-dbfb2d76a855@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
