On Mon, Feb 10, 2025 at 01:00:01PM +0530, Krishna Chaitanya Chundru wrote:
> PCIe equalization presets are predefined settings used to optimize
> signal integrity by compensating for signal loss and distortion in
> high-speed data transmission.
>
> As per PCIe spec 6.0.1 revision section 8.3.3.3 & 4.2.4 for data rates
> of 8.0 GT/s, 16.0 GT/s, 32.0 GT/s, and 64.0 GT/s, there is a way to
> configure lane equalization presets for each lane to enhance the PCIe
> link reliability. Each preset value represents a different combination
> of pre-shoot and de-emphasis values. For each data rate, different
> registers are defined: for 8.0 GT/s, registers are defined in section
> 7.7.3.4; for 16.0 GT/s, in section 7.7.5.9, etc. The 8.0 GT/s rate has
> an extra receiver preset hint, requiring 16 bits per lane, while the
> remaining data rates use 8 bits per lane.
>
> Based on the number of lanes and the supported data rate, this function
> reads the device tree property and stores in the presets structure.
>
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---
> drivers/pci/of.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/pci.h | 27 ++++++++++++++++++++++++++-
> 2 files changed, 69 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index 7a806f5c0d20..705d5529fa95 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -851,3 +851,46 @@ u32 of_pci_get_slot_power_limit(struct device_node *node,
> return slot_power_limit_mw;
> }
> EXPORT_SYMBOL_GPL(of_pci_get_slot_power_limit);
> +
> +/**
> + * of_pci_get_equalization_presets - Parses the "eq-presets-ngts" property.
nit: eq-presets-Ngts
> + *
> + * @dev: Device containing the properties.
> + * @presets: Pointer to store the parsed data.
> + * @num_lanes: Maximum number of lanes supported.
> + *
> + * If the property is present read and store the data in the preset structure
> + * assign default value 0xff to indicate property is not present.
'else assign...'
> + *
> + * Return: 0 if the property is not available or successfully parsed; errno otherwise.
> + */
> +int of_pci_get_equalization_presets(struct device *dev,
> + struct pci_eq_presets *presets,
> + int num_lanes)
> +{
> + char name[20];
> + int ret;
> +
> + presets->eq_presets_8gts[0] = PCI_EQ_RESV;
> + ret = of_property_read_u16_array(dev->of_node, "eq-presets-8gts",
> + presets->eq_presets_8gts, num_lanes);
> + if (ret && ret != -EINVAL) {
> + dev_err(dev, "Error reading eq-presets-8gts %d\n", ret);
nit: add ': ' before '%d' to make it clear that the printed value is an errno.
> + return ret;
> + }
> +
> + for (int i = 0; i < EQ_PRESET_TYPE_MAX; i++) {
> + presets->eq_presets_Ngts[i][0] = PCI_EQ_RESV;
> + snprintf(name, sizeof(name), "eq-presets-%dgts", 8 << (i + 1));
> + ret = of_property_read_u8_array(dev->of_node, name,
> + presets->eq_presets_Ngts[i],
> + num_lanes);
> + if (ret && ret != -EINVAL) {
> + dev_err(dev, "Error reading %s %d\n", name, ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pci_get_equalization_presets);
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 01e51db8d285..e87c2ffd1e85 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -9,6 +9,8 @@ struct pcie_tlp_log;
> /* Number of possible devfns: 0.0 to 1f.7 inclusive */
> #define MAX_NR_DEVFNS 256
>
> +#define MAX_NR_LANES 16
> +
> #define PCI_FIND_CAP_TTL 48
>
> #define PCI_VSEC_ID_INTEL_TBT 0x1234 /* Thunderbolt */
> @@ -808,6 +810,20 @@ static inline u64 pci_rebar_size_to_bytes(int size)
>
> struct device_node;
>
> +#define PCI_EQ_RESV 0xff
Just a single space is enough after 'define'
- Mani
--
மணிவண்ணன் சதாசிவம்
