On Tue, Feb 11, 2025 at 05:07:43PM -0800, James A. MacInnes wrote:
> This patch extends the Qualcomm USB VBUS regulator driver to support
> PMI8998 PMIC alongside the existing support for PM8150B.
Please modify this commit message according to follow the example I
provided for the patch 3. If you are unsure `git log drivers/regulator`
will provide you with good enough examples.
>
> Key changes:
> - Added current limit tables specific to PMI8998.
> - Dynamically configure the VBUS regulator based on the PMIC type.
> - Updated debug messages to reflect successful initialization for
> supported PMICs.
> - Changed registration log message
>
> These changes ensure proper VBUS current limit configuration and
> compatibility across multiple Qualcomm PMICs.
>
> Signed-off-by: James A. MacInnes <james.a.macinnes@xxxxxxxxx>
> ---
> drivers/regulator/qcom_usb_vbus-regulator.c | 38 ++++++++++++++++++---
> 1 file changed, 33 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/regulator/qcom_usb_vbus-regulator.c b/drivers/regulator/qcom_usb_vbus-regulator.c
> index cd94ed67621f..804dd1a9e057 100644
> --- a/drivers/regulator/qcom_usb_vbus-regulator.c
> +++ b/drivers/regulator/qcom_usb_vbus-regulator.c
> @@ -20,10 +20,30 @@
> #define OTG_CFG 0x53
> #define OTG_EN_SRC_CFG BIT(1)
>
> -static const unsigned int curr_table[] = {
> +struct msm_vbus_desc {
> + const unsigned int *curr_table;
> + unsigned int n_current_limits;
> +};
> +
> +static const unsigned int curr_table_pm8150b[] = {
> 500000, 1000000, 1500000, 2000000, 2500000, 3000000,
> };
>
> +static const unsigned int curr_table_pmi8998[] = {
> + 250000, 500000, 750000, 1000000,
> + 1250000, 1500000, 1750000, 2000000,
> +};
> +
> +static const struct msm_vbus_desc msm_vbus_desc_pm8150b = {
> + .curr_table = curr_table_pm8150b,
> + .n_current_limits = ARRAY_SIZE(curr_table_pm8150b),
> +};
> +
> +static const struct msm_vbus_desc msm_vbus_desc_pmi8998 = {
> + .curr_table = curr_table_pmi8998,
> + .n_current_limits = ARRAY_SIZE(curr_table_pmi8998),
> +};
> +
> static const struct regulator_ops qcom_usb_vbus_reg_ops = {
> .enable = regulator_enable_regmap,
> .disable = regulator_disable_regmap,
> @@ -37,8 +57,6 @@ static struct regulator_desc qcom_usb_vbus_rdesc = {
> .ops = &qcom_usb_vbus_reg_ops,
> .owner = THIS_MODULE,
> .type = REGULATOR_VOLTAGE,
> - .curr_table = curr_table,
> - .n_current_limits = ARRAY_SIZE(curr_table),
> };
>
> static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
> @@ -48,6 +66,7 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
> struct regmap *regmap;
> struct regulator_config config = { };
> struct regulator_init_data *init_data;
> + const struct msm_vbus_desc *quirks;
> int ret;
> u32 base;
>
> @@ -68,6 +87,12 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
> if (!init_data)
> return -ENOMEM;
>
> + quirks = of_device_get_match_data(dev);
> + if (!quirks)
> + return -ENODEV;
> +
> + qcom_usb_vbus_rdesc.curr_table = quirks->curr_table;
> + qcom_usb_vbus_rdesc.n_current_limits = quirks->n_current_limits;
> qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG;
> qcom_usb_vbus_rdesc.enable_mask = OTG_EN;
> qcom_usb_vbus_rdesc.csel_reg = base + OTG_CURRENT_LIMIT_CFG;
> @@ -80,18 +105,21 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
> rdev = devm_regulator_register(dev, &qcom_usb_vbus_rdesc, &config);
> if (IS_ERR(rdev)) {
> ret = PTR_ERR(rdev);
> - dev_err(dev, "not able to register vbus reg %d\n", ret);
> + dev_err(dev, "Failed to register vbus reg %d\n", ret);
> return ret;
> }
>
> /* Disable HW logic for VBUS enable */
> regmap_update_bits(regmap, base + OTG_CFG, OTG_EN_SRC_CFG, 0);
>
> + dev_dbg(dev, "Registered QCOM VBUS regulator\n");
> +
> return 0;
> }
>
> static const struct of_device_id qcom_usb_vbus_regulator_match[] = {
> - { .compatible = "qcom,pm8150b-vbus-reg" },
> + { .compatible = "qcom,pm8150b-vbus-reg", .data = &msm_vbus_desc_pm8150b },
> + { .compatible = "qcom,pmi8998-vbus-reg", .data = &msm_vbus_desc_pmi8998 },
> { }
> };
> MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match);
> --
> 2.43.0
>
--
With best wishes
Dmitry
