This patch extends the Qualcomm USB VBUS regulator driver to support
PMI8998 PMIC alongside the existing support for PM8150B.
Key changes:
- Added current limit tables specific to PMI8998.
- Dynamically configure the VBUS regulator based on the PMIC type.
- Updated debug messages to reflect successful initialization for
supported PMICs.
- Changed registration log message
These changes ensure proper VBUS current limit configuration and
compatibility across multiple Qualcomm PMICs.
Signed-off-by: James A. MacInnes <james.a.macinnes@xxxxxxxxx>
---
drivers/regulator/qcom_usb_vbus-regulator.c | 33 +++++++++++++++++----
1 file changed, 28 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/qcom_usb_vbus-regulator.c b/drivers/regulator/qcom_usb_vbus-regulator.c
index cd94ed67621f..bfcb77698ba2 100644
--- a/drivers/regulator/qcom_usb_vbus-regulator.c
+++ b/drivers/regulator/qcom_usb_vbus-regulator.c
@@ -20,10 +20,15 @@
#define OTG_CFG 0x53
#define OTG_EN_SRC_CFG BIT(1)
-static const unsigned int curr_table[] = {
+static const unsigned int curr_table_pm8150b[] = {
500000, 1000000, 1500000, 2000000, 2500000, 3000000,
};
+static const unsigned int curr_table_pmi8998[] = {
+ 250000, 500000, 750000, 1000000,
+ 1250000, 1500000, 1750000, 2000000,
+};
+
static const struct regulator_ops qcom_usb_vbus_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -37,8 +42,8 @@ static struct regulator_desc qcom_usb_vbus_rdesc = {
.ops = &qcom_usb_vbus_reg_ops,
.owner = THIS_MODULE,
.type = REGULATOR_VOLTAGE,
- .curr_table = curr_table,
- .n_current_limits = ARRAY_SIZE(curr_table),
+ .curr_table = NULL,
+ .n_current_limits = 0,
};
static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
@@ -50,6 +55,7 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
struct regulator_init_data *init_data;
int ret;
u32 base;
+ const char *pmic_type;
ret = of_property_read_u32(dev->of_node, "reg", &base);
if (ret < 0) {
@@ -68,6 +74,19 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
if (!init_data)
return -ENOMEM;
+ // Determine PMIC type
+ pmic_type = of_device_get_match_data(dev);
+ if (pmic_type && strcmp(pmic_type, "pmi8998") == 0) {
+ qcom_usb_vbus_rdesc.curr_table = curr_table_pmi8998;
+ qcom_usb_vbus_rdesc.n_current_limits =
+ ARRAY_SIZE(curr_table_pmi8998);
+ } else if (pmic_type && strcmp(pmic_type, "pm8150b") == 0) {
+ qcom_usb_vbus_rdesc.curr_table = curr_table_pm8150b;
+ qcom_usb_vbus_rdesc.n_current_limits =
+ ARRAY_SIZE(curr_table_pm8150b);
+ } else {
+ return -ENODEV;
+ }
qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG;
qcom_usb_vbus_rdesc.enable_mask = OTG_EN;
qcom_usb_vbus_rdesc.csel_reg = base + OTG_CURRENT_LIMIT_CFG;
@@ -80,18 +99,22 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
rdev = devm_regulator_register(dev, &qcom_usb_vbus_rdesc, &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
- dev_err(dev, "not able to register vbus reg %d\n", ret);
+ dev_err(dev, "Failed to register vbus reg %d\n", ret);
return ret;
}
/* Disable HW logic for VBUS enable */
regmap_update_bits(regmap, base + OTG_CFG, OTG_EN_SRC_CFG, 0);
+ dev_info(dev, "Registered QCOM %s VBUS regulator\n",
+ pmic_type);
+
return 0;
}
static const struct of_device_id qcom_usb_vbus_regulator_match[] = {
- { .compatible = "qcom,pm8150b-vbus-reg" },
+ { .compatible = "qcom,pm8150b-vbus-reg", .data = "pm8150b" },
+ { .compatible = "qcom,pmi8998-vbus-reg", .data = "pmi8998" },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match);
--
2.43.0
