From: Frank Li <Frank.Li@xxxxxxxxxxxxx>
This part just add necessary change to boot imx7d.
Update clock, pinctrl and gpt for imx7d
Signed-off-by: Frank Li <Frank.Li@xxxxxxxxxxxxx>
---
.../devicetree/bindings/clock/imx7d-clock.txt | 13 +++++++++++
.../bindings/pinctrl/fsl,imx7d-pinctrl.txt | 27 ++++++++++++++++++++++
.../devicetree/bindings/timer/fsl,imxgpt.txt | 3 +++
3 files changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/imx7d-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.txt b/Documentation/devicetree/bindings/clock/imx7d-clock.txt
new file mode 100644
index 0000000..3db0076
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7d-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX7 Dual
+
+Required properties:
+- compatible: Should be "fsl,imx7d-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+for the full list of i.MX7 Dual clock IDs.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
new file mode 100644
index 0000000..3c9d8ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
@@ -0,0 +1,27 @@
+* Freescale i.MX7 Dual IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx7d-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6sx-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_PUS_100K_DOWN (0 << 5)
+PAD_CTL_PUS_5K_UP (1 << 5)
+PAD_CTL_PUS_47K_UP (2 << 5)
+PAD_CTL_PUS_100K_UP (3 << 5)
+PAD_CTL_PUE (1 << 4)
+PAD_CTL_HYS (1 << 3)
+PAD_CTL_SRE_SLOW (1 << 2)
+PAD_CTL_SRE_FAST (0 << 2)
+PAD_CTL_DSE_X1 (0 << 0)
+PAD_CTL_DSE_X2 (1 << 0)
+PAD_CTL_DSE_X3 (2 << 0)
+PAD_CTL_DSE_X4 (3 << 0)
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
index 9809b11..c14843b 100644
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
@@ -7,6 +7,9 @@ Required properties:
- interrupts : A list of 4 interrupts; one per timer channel.
- clocks : The clocks provided by the SoC to drive the timer.
+Supported <soc>:
+ imx1,imx27,imx51,imx53,imx6q,imx6dl,imx6sl,imx6sx,imx7d.
+
Example:
gpt1: timer@10003000 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
