Add flexcom 10 node and its i2c-controller subnode
for usage on the SAMA7D65 Curiosity board.
Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/microchip/sama7d65.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index 854b30d15dcd..a38e04a86b6d 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -132,6 +132,27 @@ uart6: serial@200 {
};
};
+ flx10: flexcom@e2824000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe2824000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe2824000 0x800>;
+ status = "disabled";
+
+ i2c10: i2c@600 {
+ compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@e8c11000 {
compatible = "arm,cortex-a7-gic";
reg = <0xe8c11000 0x1000>,
--
2.48.1
