On Mon, 20 Jan 2025 13:01:26 +0400, Alexey Charkov wrote:
> RK3588(s) uses a several SPDIF transmitters which are software
> compatible with those found in RK3568. This series adds the required
> device tree nodes in SoC .dtsi and enables the dedicated optical
> SPDIF output on the H96 Max V58.
>
> Note that only SPDIF 0/1 are meant as externally connected outputs,
> while SPDIF 2/3/4/5 are internally routed to the various display
> encoders inside the SoC. Thus, using SPDIF 0/1 only requires their
> device tree nodes to be enabled (provided that the signal is routed
> somewhere usable on the board itself), while the rest rely on driver
> support on the display connector side and are therefore not touched
> here.
>
> [...]
Applied, thanks!
[2/3] arm64: dts: rockchip: Add SPDIF nodes to RK3588(s) device trees
commit: 271ba4d6c56c7cb295def511cbcdd9880ec41e1b
[3/3] arm64: dts: rockchip: Enable SPDIF output on H96 Max V58
commit: cd81ee8667cc13ff69e11b44a727be07035aa536
Best regards,
--
Heiko Stuebner <heiko@xxxxxxxxx>
