On Mon, 10 Feb 2025 17:10:51 +0100, Angelo Dureghello wrote: > From: Guillaume Stols <gstols@xxxxxxxxxxxx> > > A new compatible is added to reflect the specialized version of the HDL. > We use the parallel interface to write the ADC's registers, and > accessing this interface requires to use ADI_AXI_REG_CONFIG_RD, > ADI_AXI_REG_CONFIG_WR and ADI_AXI_REG_CONFIG_CTRL in a custom fashion. > > Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx> > Signed-off-by: Guillaume Stols <gstols@xxxxxxxxxxxx> > Co-developed-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx> > Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx> > --- > .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 70 +++++++++++++++++++++- > 1 file changed, 69 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: adc@0: pwm-names: ['convst1'] is too short from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-1-160df18b1da7@xxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
