On Mon, 10 Feb 2025, Lee Jones wrote:
> On Tue, 21 Jan 2025, Geert Uytterhoeven wrote:
>
> > Hi Lee,
> >
> > On Thu, Jan 9, 2025 at 11:31 AM Lee Jones <lee@xxxxxxxxxx> wrote:
> > > On Wed, 18 Dec 2024 18:33:59 +0000, Vicentiu Galanopulo wrote:
> > > > The output current can be adjusted separately for each channel by 8-bit
> > > > analog (current sink input) and 12-bit digital (PWM) dimming control. The
> > > > LED1202 implements 12 low-side current generators with independent dimming
> > > > control.
> > > > Internal volatile memory allows the user to store up to 8 different patterns,
> > > > each pattern is a particular output configuration in terms of PWM
> > > > duty-cycle (on 4096 steps). Analog dimming (on 256 steps) is per channel but
> > > > common to all patterns. Each device tree LED node will have a corresponding
> > > > entry in /sys/class/leds with the label name. The brightness property
> > > > corresponds to the per channel analog dimming, while the patterns[1-8] to the
> > > > PWM dimming control.
> > > >
> > > > [...]
> > >
> > > Applied, thanks!
> > >
> > > [3/3] leds: Add LED1202 I2C driver
> > > commit: 939757aafeb9c266dda37657ee5f7a73ffd35ae2
> >
> > You also have commit 259230378c65ebb6 ("leds: Add LED1202 I2C driver")
> > in mfd/for-mfd-next, which dropped the change to drivers/leds/Makefile,
> > and changed the Link:-tag to point to the older version v10?
>
> Interesting. Not sure I noticed and if I did, I must have fixed it.
>
> This is the commit that made it in:
>
> 939757aafeb9 ("leds: Add LED1202 I2C driver")
Scratch that - looks like:
259230378c65 ("leds: Add LED1202 I2C driver")
... also made it in. However the Makefile line survived:
drivers/leds/Makefile:obj-$(CONFIG_LEDS_ST1202) += leds-st1202.o
Did anything break or is all as expected?
--
Lee Jones [李琼斯]
