On 10/02/2025 09:46, Viken Dadhaniya wrote: > Add DT support for QUPV3 Serial Engines. > > Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> > Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> > Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> > --- > > v2 -> v3: > > - Remove build dependencies list. > - Rebase the patch. > > v2 Link: https://lore.kernel.org/linux-kernel/20241112172337.3120801-1-quic_vdadhani@xxxxxxxxxxx/ > > v1 -> v2: > > - Correct gpi dma node name and compatible strings > - Use QCOM_ICC_TAG_ALWAYS flag in interconnect property. > - Update build dependency list. > > v1 Link: https://lore.kernel.org/linux-devicetree/20241009091150.32354-1-quic_vdadhani@xxxxxxxxxxx/ > --- > --- > arch/arm64/boot/dts/qcom/qcs8300.dtsi | 1916 ++++++++++++++++++++++++- > 1 file changed, 1908 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi > index 4a057f7c0d9f..9239cd122c13 100644 > --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi > @@ -9,6 +9,7 @@ > #include <dt-bindings/clock/qcom,sa8775p-dispcc.h> > #include <dt-bindings/clock/qcom,sa8775p-gpucc.h> > #include <dt-bindings/clock/qcom,sa8775p-videocc.h> > +#include <dt-bindings/dma/qcom-gpi.h> > #include <dt-bindings/firmware/qcom,scm.h> > #include <dt-bindings/interconnect/qcom,icc.h> > #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h> > @@ -23,6 +24,39 @@ / { > #address-cells = <2>; > #size-cells = <2>; > > + aliases { > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + i2c2 = &i2c2; > + i2c3 = &i2c3; > + i2c4 = &i2c4; > + i2c5 = &i2c5; > + i2c6 = &i2c6; > + i2c8 = &i2c8; > + i2c9 = &i2c9; > + i2c10 = &i2c10; > + i2c11 = &i2c11; > + i2c12 = &i2c12; > + i2c13 = &i2c13; > + i2c14 = &i2c14; > + i2c15 = &i2c15; > + spi0 = &spi0; > + spi1 = &spi1; > + spi2 = &spi2; > + spi3 = &spi3; > + spi4 = &spi4; > + spi5 = &spi5; > + spi6 = &spi6; > + spi8 = &spi8; > + spi9 = &spi9; > + spi10 = &spi10; > + spi12 = &spi12; > + spi13 = &spi13; > + spi14 = &spi14; > + spi15 = &spi15; > + serial0 = &uart7; NAK, this does not belong to the SoC, but board. > + }; Best regards, Krzysztof
