On Tue, Apr 28, 2015 at 9:50 AM, Álvaro Fernández Rojas <noltari@xxxxxxxxx> wrote: > These patches add support and documentation for the BCM6328 LED driver, which is present on BCM6318, BCM6328, BCM6362 and BCM63268. > In these SoCs it's possible to control LEDs both as GPIOs or by hardware. > However, on some devices there are Serial LEDs (LEDs connected to a 74hc controller), which can either be controlled by software (exporting the 74hc as spi-gpio) or hardware using this driver. > The problem is some of these serial LEDs are hardware controlled (ethernet LEDs) and exporting the 74hc as spi-gpio prevents those LEDs to be hardware controlled, so the only chance to keep them working is by using this driver. > > v4->v5: Introduce changes suggested by Jacek. > v3->v4: Introduce changes suggested by Jacek. > v2->v3: Introduce changes suggested by Jacek. > v1->v2: Introduce changes suggested by Florian and Jonas. > Applied to my tree, thanks. -Bryan > Álvaro Fernández Rojas (2): > leds: add DT binding for BCM6328 LED controller > leds: add BCM6328 LED driver > > .../devicetree/bindings/leds/leds-bcm6328.txt | 309 +++++++++++++++ > drivers/leds/Kconfig | 8 + > drivers/leds/Makefile | 1 + > drivers/leds/leds-bcm6328.c | 413 +++++++++++++++++++++ > 4 files changed, 731 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm6328.txt > create mode 100644 drivers/leds/leds-bcm6328.c > > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
