This is my attempt at trying to sort out the mess I've created with the RTL9300 switch dt-bindings. Some context is available on [1] and [2]. The first patch just moves the binding from mfd/ to net/ (with an adjustment of the internal path name). The next two patches are successors to patches already sent as part of the series [3]. Finally the last two patches are needed to update the in-tree dts to pass `make dtbs_check`, I couldn't figure out a clean way of decoupling these `make dtbs_check` will either complain that the dts has unexpected properties or that it is missing required properties. [1] - https://lore.kernel.org/lkml/20250204-eccentric-deer-of-felicity-02b7ee@krzk-bin/ [2] - https://lore.kernel.org/lkml/4e3c5d83-d215-4eff-bf02-6d420592df8f@xxxxxxxxxxxxxxxxxxx/ [3] - https://lore.kernel.org/lkml/20250204030249.1965444-1-chris.packham@xxxxxxxxxxxxxxxxxxx/ Chris Packham (5): dt-bindings: net: Move realtek,rtl9301-switch to net dt-bindings: net: Add switch ports and interrupts to RTL9300 dt-bindings: net: Add Realtek MDIO controller mips: dts: realtek: Add switch interrupts mips: dts: cameo-rtl9302c: Add switch block .../bindings/net/realtek,rtl9301-mdio.yaml | 86 +++++++++++++++++++ .../{mfd => net}/realtek,rtl9301-switch.yaml | 63 +++++++++++++- .../cameo-rtl9302c-2x-rtl8224-2xge.dts | 48 +++++++++++ arch/mips/boot/dts/realtek/rtl930x.dtsi | 3 + 4 files changed, 199 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml rename Documentation/devicetree/bindings/{mfd => net}/realtek,rtl9301-switch.yaml (66%) -- 2.48.1
