This series adds very basic support for Milk-V Duo Module 01 EVB [1] in arm64 mode. The SoC (SG2000) is dual-arch, RiscV and ARM64, the latter has been chosen because the upstream toolchain can be utilized. Sophgo SG2000 seems to be a continuation of the Cvitek CV18xx series, same peripherals with an addition of ARM64 core. Therefore it would be beneficial not to copy-paste the peripherals' device-tree, but rather split the most suitable riscv DT into ARCH-specific and peripherals parts and just include the latter on the arm64 side. This series adds the device-tree for Milk-V Duo Module 01 EVB, which in turn contains Milk-V Duo Module 01 (separate .dtsi) on it, which has SG2000 SoC inside (separate .dtsi). This series has been tested with Sophgo-provided U-Boot binary [2]: it boots from SD card, pinctrl, serial, GPIO drivers are functional (same as for RiscV-based CV18xx SoCs). New reset driver is provided as an alternative to the ATF PSCI handler, which Sophgo only provides in binary form. Partial SoC documentation is available [3]. This series lacks the support of: - USB - Audio - Ethernet - WiFi - Bluetooth - eMMC - Video It would probably make sense that the whole series would go into SOC tree, even though technically nothing prevents the reboot/reset driver to come in PM/reset tree. If everything would come together, `reboot` command would work out of the box. [1] https://milkv.io/docs/duo/getting-started/duo-module-01 [2] https://github.com/milkv-duo/duo-buildroot-sdk-v2/releases/ [3] https://github.com/sophgo/sophgo-doc/releases/download/sg2000-trm-v1.01/sg2000_trm_en.pdf Alexander Sverdlin (10): arm64: Add SOPHGO SOC family Kconfig support riscv: dts: sophgo: cv18xx: Split into CPU core and peripheral parts arm64: dts: sophgo: Add initial SG2000 SoC device tree arm64: dts: sophgo: Add Duo Module 01 arm64: dts: sophgo: Add Duo Module 01 Evaluation Board dt-bindings: mfd: syscon: Add Cvitek CV18xx rtcsys core and ctrl compatible dt-bindings: reset: sophgo: Add CV18xx reset controller riscv/arm64: dts: cv18xx: Add sysctl and reset nodes power: reset: cv18xx: New driver arm64: defconfig: Enable rudimentary Sophgo SG2000 support .../devicetree/bindings/mfd/syscon.yaml | 4 + .../bindings/reset/sophgo,cv1800-reset.yaml | 38 ++ MAINTAINERS | 1 + arch/arm64/Kconfig.platforms | 12 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/sophgo/Makefile | 2 + arch/arm64/boot/dts/sophgo/sg2000.dtsi | 79 +++++ .../sophgo/sg2000_milkv_duo_module_01.dtsi | 84 +++++ .../sophgo/sg2000_milkv_duo_module_01_evb.dts | 30 ++ arch/arm64/configs/defconfig | 3 + arch/riscv/boot/dts/sophgo/cv181x.dtsi | 2 +- arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi | 329 ++++++++++++++++++ arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 305 +--------------- drivers/power/reset/Kconfig | 12 + drivers/power/reset/Makefile | 1 + drivers/power/reset/cv18xx-reset.c | 89 +++++ 16 files changed, 689 insertions(+), 303 deletions(-) create mode 100644 Documentation/devicetree/bindings/reset/sophgo,cv1800-reset.yaml create mode 100644 arch/arm64/boot/dts/sophgo/Makefile create mode 100644 arch/arm64/boot/dts/sophgo/sg2000.dtsi create mode 100644 arch/arm64/boot/dts/sophgo/sg2000_milkv_duo_module_01.dtsi create mode 100644 arch/arm64/boot/dts/sophgo/sg2000_milkv_duo_module_01_evb.dts create mode 100644 arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi create mode 100644 drivers/power/reset/cv18xx-reset.c -- 2.48.1
