On Mon, 2015-04-27 at 12:40 +0100, Sudeep Holla wrote: > This patch adds support for System Control and Power Interface (SCPI) > Message Protocol used between the Application Cores(AP) and the System > Control Processor(SCP). The MHU peripheral provides a mechanism for > inter-processor communication between SCP's M3 processor and AP. > > SCP offers control and management of the core/cluster power states, > various power domain DVFS including the core/cluster, certain system > clocks configuration, thermal sensors and many others. > > This protocol driver provides interface for all the client drivers using > SCPI to make use of the features offered by the SCP. > > Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > CC: Jassi Brar <jassisinghbrar@xxxxxxxxx> > Cc: Liviu Dudau <Liviu.Dudau@xxxxxxx> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> > Cc: Jon Medhurst (Tixy) <tixy@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > --- There are several spelling errors but I won't point out each, sure you can find them with a spellcheck ;-) I'll just comment on the code... [...] > +++ b/drivers/mailbox/scpi_protocol.c > @@ -0,0 +1,694 @@ > +/* > + * System Control and Power Interface (SCPI) Message Protocol driver > + * > + * SCPI Message Protocol is used between the System Control Processor(SCP) > + * and the Application Processors(AP). The Message Handling Unit(MHU) > + * provides a mechanism for inter-processor communication between SCP's > + * Cortex M3 and AP. > + * > + * SCP offers control and management of the core/cluster power states, > + * various power domain DVFS including the core/cluster, certain system > + * clocks configuration, thermal sensors and many others. > + * > + * Copyright (C) 2015 ARM Ltd. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > + > +#include <linux/bitmap.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/export.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/list.h> > +#include <linux/mailbox_client.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/printk.h> > +#include <linux/scpi_protocol.h> > +#include <linux/slab.h> > +#include <linux/spinlock.h> > + > +#define CMD_ID_SHIFT 0 > +#define CMD_ID_MASK 0x7f > +#define CMD_TOKEN_ID_SHIFT 8 > +#define CMD_TOKEN_ID_MASK 0xff > +#define CMD_DATA_SIZE_SHIFT 16 > +#define CMD_DATA_SIZE_MASK 0x1ff > +#define PACK_SCPI_CMD(cmd_id, token, tx_sz) \ > + ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \ > + (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT) | \ > + (((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT)) > + > +#define CMD_SIZE(cmd) (((cmd) >> CMD_DATA_SIZE_SHIFT) & CMD_DATA_SIZE_MASK) > +#define CMD_UNIQ_MASK (CMD_TOKEN_ID_MASK << CMD_TOKEN_ID_SHIFT | CMD_ID_MASK) > +#define CMD_XTRACT_UNIQ(cmd) ((cmd) & CMD_UNIQ_MASK) > + > +#define SCPI_SLOT 0 > + > +#define MAX_DVFS_DOMAINS 8 > +#define MAX_DVFS_OPPS 8 > +#define DVFS_LATENCY(hdr) (le32_to_cpu(hdr) >> 16) > +#define DVFS_OPP_COUNT(hdr) ((le32_to_cpu(hdr) >> 8) & 0xff) > + > +#define PROTOCOL_REV_MINOR_BITS 16 > +#define PROTOCOL_REV_MINOR_MASK ((1U << PROTOCOL_REV_MINOR_BITS) - 1) > +#define PROTOCOL_REV_MAJOR(x) ((x) >> PROTOCOL_REV_MINOR_BITS) > +#define PROTOCOL_REV_MINOR(x) ((x) & PROTOCOL_REV_MINOR_MASK) > + > +#define FW_REV_MAJOR_BITS 24 > +#define FW_REV_MINOR_BITS 16 > +#define FW_REV_PATCH_MASK ((1U << FW_REV_MINOR_BITS) - 1) > +#define FW_REV_MINOR_MASK ((1U << FW_REV_MAJOR_BITS) - 1) > +#define FW_REV_MAJOR(x) ((x) >> FW_REV_MAJOR_BITS) > +#define FW_REV_MINOR(x) (((x) & FW_REV_MINOR_MASK) >> FW_REV_MINOR_BITS) > +#define FW_REV_PATCH(x) ((x) & FW_REV_PATCH_MASK) > + > +#define MAX_RX_TIMEOUT (msecs_to_jiffies(30)) > + > +enum scpi_error_codes { > + SCPI_SUCCESS = 0, /* Success */ > + SCPI_ERR_PARAM = 1, /* Invalid parameter(s) */ > + SCPI_ERR_ALIGN = 2, /* Invalid alignment */ > + SCPI_ERR_SIZE = 3, /* Invalid size */ > + SCPI_ERR_HANDLER = 4, /* Invalid handler/callback */ > + SCPI_ERR_ACCESS = 5, /* Invalid access/permission denied */ > + SCPI_ERR_RANGE = 6, /* Value out of range */ > + SCPI_ERR_TIMEOUT = 7, /* Timeout has occurred */ > + SCPI_ERR_NOMEM = 8, /* Invalid memory area or pointer */ > + SCPI_ERR_PWRSTATE = 9, /* Invalid power state */ > + SCPI_ERR_SUPPORT = 10, /* Not supported or disabled */ > + SCPI_ERR_DEVICE = 11, /* Device error */ > + SCPI_ERR_BUSY = 12, /* Device busy */ > + SCPI_ERR_MAX > +}; > + > +enum scpi_std_cmd { > + SCPI_CMD_INVALID = 0x00, > + SCPI_CMD_SCPI_READY = 0x01, > + SCPI_CMD_SCPI_CAPABILITIES = 0x02, > + SCPI_CMD_SET_CSS_PWR_STATE = 0x03, > + SCPI_CMD_GET_CSS_PWR_STATE = 0x04, > + SCPI_CMD_SET_SYS_PWR_STATE = 0x05, > + SCPI_CMD_SET_CPU_TIMER = 0x06, > + SCPI_CMD_CANCEL_CPU_TIMER = 0x07, > + SCPI_CMD_DVFS_CAPABILITIES = 0x08, > + SCPI_CMD_GET_DVFS_INFO = 0x09, > + SCPI_CMD_SET_DVFS = 0x0a, > + SCPI_CMD_GET_DVFS = 0x0b, > + SCPI_CMD_GET_DVFS_STAT = 0x0c, > + SCPI_CMD_CLOCK_CAPABILITIES = 0x0d, > + SCPI_CMD_GET_CLOCK_INFO = 0x0e, > + SCPI_CMD_SET_CLOCK_VALUE = 0x0f, > + SCPI_CMD_GET_CLOCK_VALUE = 0x10, > + SCPI_CMD_PSU_CAPABILITIES = 0x11, > + SCPI_CMD_GET_PSU_INFO = 0x12, > + SCPI_CMD_SET_PSU = 0x13, > + SCPI_CMD_GET_PSU = 0x14, > + SCPI_CMD_SENSOR_CAPABILITIES = 0x15, > + SCPI_CMD_SENSOR_INFO = 0x16, > + SCPI_CMD_SENSOR_VALUE = 0x17, > + SCPI_CMD_SENSOR_CFG_PERIODIC = 0x18, > + SCPI_CMD_SENSOR_CFG_BOUNDS = 0x19, > + SCPI_CMD_SENSOR_ASYNC_VALUE = 0x1a, > + SCPI_CMD_SET_DEVICE_PWR_STATE = 0x1b, > + SCPI_CMD_GET_DEVICE_PWR_STATE = 0x1c, > + SCPI_CMD_COUNT > +}; > + > +struct scpi_xfer { > + u32 slot; /* has to be first element */ > + u32 cmd; > + u32 status; > + const void *tx_buf; > + void *rx_buf; > + unsigned int tx_len; > + struct list_head node; > + struct completion done; > +}; > + > +struct scpi_chan { > + struct mbox_client cl; > + struct mbox_chan *chan; > + void __iomem *tx_payload; > + void __iomem *rx_payload; > + struct list_head rx_pending; > + struct list_head xfers_list; > + struct scpi_xfer *xfers; > + spinlock_t rx_lock; /* locking for the rx pending list */ > + struct mutex xfers_lock; > + atomic_t token; > +}; > + > +struct scpi_drvinfo { > + u32 protocol_version; > + u32 firmware_version; > + int num_chans; > + atomic_t next_chan; > + struct scpi_ops *scpi_ops; > + struct scpi_chan *channels; > + struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS]; > +}; > + > +/* > + * The SCP firmware only executes in little-endian mode, so any buffers > + * shared through SCPI should have their contents converted to little-endian > + */ > +struct scpi_shared_mem { > + __le32 command; > + __le32 status; > + u8 payload[0]; > +} __packed; > + > +struct scp_capabilities { > + __le32 protocol_version; > + __le32 event_version; > + __le32 platform_version; > + __le32 commands[4]; > +} __packed; > + > +struct clk_get_info { > + __le16 id; > + __le16 flags; > + __le32 min_rate; > + __le32 max_rate; > + u8 name[20]; > +} __packed; > + > +struct clk_get_value { > + __le32 rate; > +} __packed; > + > +struct clk_set_value { > + __le16 id; > + __le16 reserved; > + __le32 rate; > +} __packed; > + > +struct dvfs_info { > + __le32 header; > + struct { > + __le32 freq; > + __le32 m_volt; > + } opps[MAX_DVFS_OPPS]; > +} __packed; > + > +struct dvfs_get { > + u8 index; > +} __packed; > + > +struct dvfs_set { > + u8 domain; > + u8 index; > +} __packed; > + > +static struct scpi_drvinfo *scpi_info; > + > +static int scpi_linux_errmap[SCPI_ERR_MAX] = { > + /* better than switch case as long as return value is continuous */ > + 0, /* SCPI_SUCCESS */ > + -EINVAL, /* SCPI_ERR_PARAM */ > + -ENOEXEC, /* SCPI_ERR_ALIGN */ > + -EMSGSIZE, /* SCPI_ERR_SIZE */ > + -EINVAL, /* SCPI_ERR_HANDLER */ > + -EACCES, /* SCPI_ERR_ACCESS */ > + -ERANGE, /* SCPI_ERR_RANGE */ > + -ETIMEDOUT, /* SCPI_ERR_TIMEOUT */ > + -ENOMEM, /* SCPI_ERR_NOMEM */ > + -EINVAL, /* SCPI_ERR_PWRSTATE */ > + -EOPNOTSUPP, /* SCPI_ERR_SUPPORT */ > + -EIO, /* SCPI_ERR_DEVICE */ > + -EBUSY, /* SCPI_ERR_BUSY */ > +}; > + > +static inline int scpi_to_linux_errno(int errno) > +{ > + if (errno >= SCPI_SUCCESS && errno < SCPI_ERR_MAX) > + return scpi_linux_errmap[errno]; > + return -EIO; > +} > + > +static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd) > +{ > + unsigned long flags; > + struct scpi_xfer *t, *match = NULL; > + > + spin_lock_irqsave(&ch->rx_lock, flags); > + if (list_empty(&ch->rx_pending)) { > + spin_unlock_irqrestore(&ch->rx_lock, flags); > + return; > + } > + > + list_for_each_entry(t, &ch->rx_pending, node) > + if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) { So if UNIQ here isn't actually unique amongst all pending requests, its possible we'll pick the wrong one. There's a couple of scenarios where that can happen, comments further down about that. > + list_del(&t->node); > + match = t; > + break; > + } > + /* check if wait_for_completion is in progress or timed-out */ > + if (match && !completion_done(&match->done)) { > + struct scpi_shared_mem *mem = ch->rx_payload; > + > + match->status = le32_to_cpu(mem->status); > + memcpy_fromio(match->rx_buf, mem->payload, CMD_SIZE(cmd)); > + complete(&match->done); > + } > + spin_unlock_irqrestore(&ch->rx_lock, flags); > +} > + > +static void scpi_handle_remote_msg(struct mbox_client *c, void *msg) > +{ > + struct scpi_chan *ch = container_of(c, struct scpi_chan, cl); > + struct scpi_shared_mem *mem = ch->rx_payload; > + u32 cmd = le32_to_cpu(mem->command); > + > + scpi_process_cmd(ch, cmd); > +} > + > +static void scpi_tx_prepare(struct mbox_client *c, void *msg) > +{ > + unsigned long flags; > + struct scpi_xfer *t = msg; > + struct scpi_chan *ch = container_of(c, struct scpi_chan, cl); > + struct scpi_shared_mem *mem = (struct scpi_shared_mem *)ch->tx_payload; > + > + mem->command = cpu_to_le32(t->cmd); > + if (t->tx_buf) > + memcpy_toio(mem->payload, t->tx_buf, t->tx_len); > + if (t->rx_buf) { > + spin_lock_irqsave(&ch->rx_lock, flags); > + list_add_tail(&t->node, &ch->rx_pending); > + spin_unlock_irqrestore(&ch->rx_lock, flags); > + } > +} > + > +static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch) > +{ > + struct scpi_xfer *t; > + > + mutex_lock(&ch->xfers_lock); > + if (list_empty(&ch->xfers_list)) { > + mutex_unlock(&ch->xfers_lock); > + return NULL; > + } > + t = list_first_entry(&ch->xfers_list, struct scpi_xfer, node); > + list_del(&t->node); > + mutex_unlock(&ch->xfers_lock); > + return t; > +} > + > +static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch) > +{ > + mutex_lock(&ch->xfers_lock); > + list_add_tail(&t->node, &ch->xfers_list); > + mutex_unlock(&ch->xfers_lock); > +} > + > +static int > +scpi_send_message(u8 cmd, void *tx_buf, unsigned int len, void *rx_buf) > +{ So the caller doesn't specify the length of rx_buf, wouldn't this be a good idea? That way we could truncate data sent from the SCP which would prevent buffer overruns due to buggy SCP or Linux code. It would also allow the SCP message format to be extended in the future in a backwards compatible way. And we could zero fill any data that was too short to allow compatibility with Linux drivers using any new extended format messages on older SCP firmware. Or at least so any bugs behave more consistently by seeing zeros instead of random data left over from old messages. > + int ret; > + u8 token, chan; > + struct scpi_xfer *msg; > + struct scpi_chan *scpi_chan; > + > + chan = atomic_inc_return(&scpi_info->next_chan) % scpi_info->num_chans; > + scpi_chan = scpi_info->channels + chan; > + > + msg = get_scpi_xfer(scpi_chan); > + if (!msg) > + return -ENOMEM; > + > + token = atomic_inc_return(&scpi_chan->token) & CMD_TOKEN_ID_MASK; So, this 8 bit token is what's used to 'uniquely' identify a pending command. But as it's just an incrementing value, then if one command gets delayed for long enough that 256 more are issued then we will have a non-unique value and scpi_process_cmd can go wrong. Note, this delay doesn't just have to be at the SCPI end. We could get preempted here (?) before actually sending the command to the SCP and other kernel threads or processes could send those other 256 commands before we get to run again. Wouldn't it be better instead to have scpi_alloc_xfer_list add a unique number to each struct scpi_xfer. > + > + msg->slot = BIT(SCPI_SLOT); > + msg->cmd = PACK_SCPI_CMD(cmd, token, len); > + msg->tx_buf = tx_buf; > + msg->tx_len = len; > + msg->rx_buf = rx_buf; > + init_completion(&msg->done); > + > + ret = mbox_send_message(scpi_chan->chan, msg); > + if (ret < 0 || !rx_buf) > + goto out; > + > + if (!wait_for_completion_timeout(&msg->done, MAX_RX_TIMEOUT)) > + ret = -ETIMEDOUT; > + else > + /* first status word */ > + ret = le32_to_cpu(msg->status); > +out: > + if (ret < 0 && rx_buf) /* remove entry from the list if timed-out */ So, even with my suggestion that the unique message identifies are fixed values stored in struct scpi_xfer, we can still have the situation where we timeout a request, that scpi_xfer then getting used for another request, and finally the SCP completes the request that we timed out, which has the same 'unique' value as the later one. One way to handle that it to not have any timeout on requests and assume the firmware isn't buggy. Another way is to have something more closely approximating unique in the message, e.g. a 64-bit incrementing count. I realise though that ARM have already finished the spec so we're limited to 8-bits :-( > + scpi_process_cmd(scpi_chan, msg->cmd); > + > + put_scpi_xfer(msg, scpi_chan); > + /* SCPI error codes > 0, translate them to Linux scale*/ > + return ret > 0 ? scpi_to_linux_errno(ret) : ret; > +} > + > +static u32 scpi_get_version(void) > +{ > + return scpi_info->protocol_version; > +} > + > +static int > +scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max) > +{ > + int ret; > + struct clk_get_info clk; > + __le16 le_clk_id = cpu_to_le16(clk_id); > + > + ret = scpi_send_message(SCPI_CMD_GET_CLOCK_INFO, > + &le_clk_id, sizeof(le_clk_id), &clk); > + if (!ret) { > + *min = le32_to_cpu(clk.min_rate); > + *max = le32_to_cpu(clk.max_rate); > + } > + return ret; > +} > + > +static unsigned long scpi_clk_get_val(u16 clk_id) > +{ > + int ret; > + struct clk_get_value clk; > + __le16 le_clk_id = cpu_to_le16(clk_id); > + > + ret = scpi_send_message(SCPI_CMD_GET_CLOCK_VALUE, > + &le_clk_id, sizeof(le_clk_id), &clk); > + return ret ? ret : le32_to_cpu(clk.rate); > +} > + > +static int scpi_clk_set_val(u16 clk_id, unsigned long rate) > +{ > + int stat; > + struct clk_set_value clk = { > + cpu_to_le16(clk_id), 0, cpu_to_le32(rate) I know that '0' is what I suggested when I spotted the 'reserved' member wasn't being allowed for, but I have since thought that the more robust way of initialising structures here, and in other functions below, might be with this syntax: .id = cpu_to_le16(clk_id), .rate = cpu_to_le32(rate) > + }; > + > + return scpi_send_message(SCPI_CMD_SET_CLOCK_VALUE, > + &clk, sizeof(clk), &stat); > +} > + > +static int scpi_dvfs_get_idx(u8 domain) > +{ > + int ret; > + struct dvfs_get dvfs; > + > + ret = scpi_send_message(SCPI_CMD_GET_DVFS, > + &domain, sizeof(domain), &dvfs); > + return ret ? ret : dvfs.index; > +} > + > +static int scpi_dvfs_set_idx(u8 domain, u8 index) > +{ > + int stat; > + struct dvfs_set dvfs = {domain, index}; > + > + return scpi_send_message(SCPI_CMD_SET_DVFS, > + &dvfs, sizeof(dvfs), &stat); > +} > + > +static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain) > +{ > + struct scpi_dvfs_info *info; > + struct scpi_opp *opp; > + struct dvfs_info buf; > + int ret, i; > + > + if (domain >= MAX_DVFS_DOMAINS) > + return ERR_PTR(-EINVAL); > + > + if (scpi_info->dvfs[domain]) /* data already populated */ > + return scpi_info->dvfs[domain]; > + > + ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO, &domain, > + sizeof(domain), &buf); > + > + if (ret) > + return ERR_PTR(ret); > + > + info = kmalloc(sizeof(*info), GFP_KERNEL); > + if (!info) > + return ERR_PTR(-ENOMEM); > + > + info->count = DVFS_OPP_COUNT(buf.header); > + info->latency = DVFS_LATENCY(buf.header) * 1000; /* uS to nS */ > + > + info->opps = kcalloc(info->count, sizeof(*opp), GFP_KERNEL); > + if (!info->opps) { > + kfree(info); > + return ERR_PTR(-ENOMEM); > + } > + > + for (i = 0, opp = info->opps; i < info->count; i++, opp++) { > + opp->freq = le32_to_cpu(buf.opps[i].freq); > + opp->m_volt = le32_to_cpu(buf.opps[i].m_volt); > + } > + > + scpi_info->dvfs[domain] = info; > + return info; > +} > + > +static struct scpi_ops scpi_ops = { > + .get_version = scpi_get_version, > + .clk_get_range = scpi_clk_get_range, > + .clk_get_val = scpi_clk_get_val, > + .clk_set_val = scpi_clk_set_val, > + .dvfs_get_idx = scpi_dvfs_get_idx, > + .dvfs_set_idx = scpi_dvfs_set_idx, > + .dvfs_get_info = scpi_dvfs_get_info, > +}; > + > +struct scpi_ops *get_scpi_ops(void) > +{ > + return scpi_info ? scpi_info->scpi_ops : NULL; > +} > +EXPORT_SYMBOL_GPL(get_scpi_ops); I'm curious to know why the interface for users of this driver is an array of function pointers rather than just exporting functions statically. The pointer array would be the sort of thing you'd do if there were more than one possible provider of this interface in the kernel, is this what we expect? > + > +static int scpi_init_versions(struct scpi_drvinfo *info) > +{ > + int ret; > + struct scp_capabilities caps; > + > + ret = scpi_send_message(SCPI_CMD_SCPI_CAPABILITIES, NULL, 0, &caps); > + if (!ret) { > + info->protocol_version = le32_to_cpu(caps.protocol_version); > + info->firmware_version = le32_to_cpu(caps.platform_version); > + } > + return ret; > +} > + > +static ssize_t protocol_version_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev); > + > + return sprintf(buf, "%d.%d\n", > + PROTOCOL_REV_MAJOR(scpi_info->protocol_version), > + PROTOCOL_REV_MINOR(scpi_info->protocol_version)); > +} > +static DEVICE_ATTR_RO(protocol_version); > + > +static ssize_t firmware_version_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev); > + > + return sprintf(buf, "%d.%d.%d\n", > + FW_REV_MAJOR(scpi_info->firmware_version), > + FW_REV_MINOR(scpi_info->firmware_version), > + FW_REV_PATCH(scpi_info->firmware_version)); > +} > +static DEVICE_ATTR_RO(firmware_version); > + > +static struct attribute *versions_attrs[] = { > + &dev_attr_firmware_version.attr, > + &dev_attr_protocol_version.attr, > + NULL, > +}; > +ATTRIBUTE_GROUPS(versions); > + > +static void > +scpi_free_channels(struct device *dev, struct scpi_chan *pchan, int count) > +{ > + int i; > + > + for (i = 0; i < count && pchan->chan; i++, pchan++) { > + mbox_free_channel(pchan->chan); > + devm_kfree(dev, pchan->xfers); > + devm_iounmap(dev, pchan->rx_payload); > + } > +} > + > +static int scpi_remove(struct platform_device *pdev) > +{ > + int i; > + struct device *dev = &pdev->dev; > + struct scpi_drvinfo *info = platform_get_drvdata(pdev); > + > + scpi_info = NULL; /* stop exporting SCPI ops through get_scpi_ops */ > + > + of_platform_depopulate(dev); > + sysfs_remove_groups(&dev->kobj, versions_groups); > + scpi_free_channels(dev, info->channels, info->num_chans); > + platform_set_drvdata(pdev, NULL); > + > + for (i = 0; i < MAX_DVFS_DOMAINS && info->dvfs[i]; i++) { > + kfree(info->dvfs[i]->opps); > + kfree(info->dvfs[i]); > + } > + devm_kfree(dev, info->channels); > + devm_kfree(dev, info); > + > + return 0; > +} > + > +#define MAX_SCPI_XFERS 10 > +static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch) > +{ > + int i; > + struct scpi_xfer *xfers; > + > + xfers = devm_kzalloc(dev, MAX_SCPI_XFERS * sizeof(*xfers), GFP_KERNEL); > + if (!xfers) > + return -ENOMEM; > + > + ch->xfers = xfers; > + for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++) > + list_add_tail(&xfers->node, &ch->xfers_list); > + return 0; > +} > + > +static int scpi_probe(struct platform_device *pdev) > +{ > + int count, idx, ret; > + struct resource res; > + struct scpi_chan *scpi_chan; > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + > + scpi_info = devm_kzalloc(dev, sizeof(*scpi_info), GFP_KERNEL); > + if (!scpi_info) { > + dev_err(dev, "failed to allocate memory for scpi drvinfo\n"); > + return -ENOMEM; > + } > + > + count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells"); > + if (count < 0) { > + dev_err(dev, "no mboxes property in '%s'\n", np->full_name); > + return -ENODEV; > + } > + > + scpi_chan = devm_kcalloc(dev, count, sizeof(*scpi_chan), GFP_KERNEL); > + if (!scpi_chan) { > + dev_err(dev, "failed to allocate memory scpi chaninfo\n"); > + return -ENOMEM; > + } > + > + for (idx = 0; idx < count; idx++) { > + resource_size_t size; > + struct scpi_chan *pchan = scpi_chan + idx; > + struct mbox_client *cl = &pchan->cl; > + struct device_node *shmem = of_parse_phandle(np, "shmem", idx); > + > + if (of_address_to_resource(shmem, 0, &res)) { > + dev_err(dev, "failed to get SCPI payload mem resource\n"); > + ret = -EINVAL; > + goto err; > + } > + > + size = resource_size(&res); > + pchan->rx_payload = devm_ioremap(dev, res.start, size); > + if (!pchan->rx_payload) { > + dev_err(dev, "failed to ioremap SCPI payload\n"); > + ret = -EADDRNOTAVAIL; > + goto err; > + } > + pchan->tx_payload = pchan->rx_payload + (size >> 1); > + > + cl->dev = dev; > + cl->rx_callback = scpi_handle_remote_msg; > + cl->tx_prepare = scpi_tx_prepare; > + cl->tx_block = true; > + cl->tx_tout = 50; > + cl->knows_txdone = false; /* controller can ack */ > + > + INIT_LIST_HEAD(&pchan->rx_pending); > + INIT_LIST_HEAD(&pchan->xfers_list); > + spin_lock_init(&pchan->rx_lock); > + mutex_init(&pchan->xfers_lock); > + > + ret = scpi_alloc_xfer_list(dev, pchan); > + if (!ret) { > + pchan->chan = mbox_request_channel(cl, idx); > + if (!IS_ERR(pchan->chan)) > + continue; > + ret = -EPROBE_DEFER; > + dev_err(dev, "failed to acquire channel#%d\n", idx); > + } > +err: > + scpi_free_channels(dev, scpi_chan, idx); Think we need to add one to 'idx' above, otherwise we won't free up resources we successfully allocated to the current channel before we got the error. Actually, we also fail to free scpi_chan and scpi_info, so should we not just call scpi_remove here instead? (Would require some tweaks as scpi_info and drvdata aren't set until a bit further down.) > + scpi_info = NULL; > + return ret; > + } > + > + scpi_info->channels = scpi_chan; > + scpi_info->num_chans = count; > + platform_set_drvdata(pdev, scpi_info); > + > + ret = scpi_init_versions(scpi_info); > + if (ret) { > + dev_err(dev, "incorrect or no SCP firmware found\n"); > + scpi_remove(pdev); > + return ret; > + } > + > + _dev_info(dev, "SCP Protocol %d.%d Firmware %d.%d.%d version\n", > + PROTOCOL_REV_MAJOR(scpi_info->protocol_version), > + PROTOCOL_REV_MINOR(scpi_info->protocol_version), > + FW_REV_MAJOR(scpi_info->firmware_version), > + FW_REV_MINOR(scpi_info->firmware_version), > + FW_REV_PATCH(scpi_info->firmware_version)); > + scpi_info->scpi_ops = &scpi_ops; > + > + ret = sysfs_create_groups(&dev->kobj, versions_groups); > + if (ret) > + dev_err(dev, "unable to create sysfs version group\n"); > + > + return of_platform_populate(dev->of_node, NULL, NULL, dev); > +} > + > +static const struct of_device_id scpi_of_match[] = { > + {.compatible = "arm,scpi"}, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(of, scpi_of_match); > + > +static struct platform_driver scpi_driver = { > + .driver = { > + .name = "scpi_protocol", > + .of_match_table = scpi_of_match, > + }, > + .probe = scpi_probe, > + .remove = scpi_remove, > +}; > +module_platform_driver(scpi_driver); > + > +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@xxxxxxx>"); > +MODULE_DESCRIPTION("ARM SCPI mailbox protocol driver"); > +MODULE_LICENSE("GPL"); [...] -- Tixy -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
