This patch set adds a pinctrl driver for NXP LPC18xx/43xx devices. The pinctrl driver uses the generic muxing and properties DT bindings as described in pinctrl-bindings.txt. There is still two TODOs left in the pinctrl driver regarding property control of special usb1 pins but I would like it merged regardless of this. Support will be added once I get USB up and running on the MCU. Checkpatch complains a lot about the driver but that's what you get when you embedd a large function/pin spec table from the data sheet I guess. Changes since v1: - minor white space fixes - split pinctrl/gpio patch set - rebase on v4.1-rc1 Since there were no comments on v1. I hope that these drivers can make it to Linux 4.1. There are no dependencies in this patch set. The DTS changes will be sent separately to arm-soc once this patch set goes upstream. Base support for the NXP LPC18xx family can be found here: http://marc.info/?l=linux-arm-kernel&m=143016894704253&w=2 Joachim Eastwood (2): pinctrl: add lpc18xx pinctrl driver doc: dt: add documentation for lpc1850-scu pinctrl driver .../bindings/pinctrl/nxp,lpc1850-scu.txt | 57 + drivers/pinctrl/Kconfig | 9 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-lpc18xx.c | 1144 ++++++++++++++++++++ 4 files changed, 1211 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt create mode 100644 drivers/pinctrl/pinctrl-lpc18xx.c -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
