On 23/04/15 19:34, Irina Tirdea wrote: > Add binding documentation for Bosch BMC150 magnetometer. > > Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx> This is trivial enough that I'll happily take it once the 3 weeks from first posting are up (I'm guessing that still applies to device tree bindings). > --- > .../bindings/iio/magnetometer/bmc150_magn.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt > > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt > new file mode 100644 > index 0000000..9f263b7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt > @@ -0,0 +1,22 @@ > +* Bosch BMC150 magnetometer sensor > + > +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf > + > +Required properties: > + > + - compatible : should be "bosch,bmc150_magn" > + - reg : the I2C address of the magnetometer > + > +Optional properties: > + > + - interrupt-parent : phandle to the parent interrupt controller > + - interrupts : interrupt mapping for GPIO IRQ > + > +Example: > + > +bmc150_magn@12 { > + compatible = "bosch,bmc150_magn"; > + reg = <0x12>; > + interrupt-parent = <&gpio1>; > + interrupts = <0 1>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
