On dinsdag 28 januari 2025 12:14:09 Midden-Europese standaardtijd Konrad
Dybcio wrote:
> On 27.01.2025 11:45 PM, Luca Weiss wrote:
> > Enable the modem found on the MSM8926 HTC One Mini 2.
> >
> > Signed-off-by: Luca Weiss <luca@xxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/
boot/dts/qcom/qcom-msm8926-htc-memul.dts
> > index
d6eaa82cee4daf6a1386902f537f1351811d4a06..cb571aa13c11598182dc020f064fe8268bcc061f
100644
> > --- a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
> > +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
> > @@ -195,6 +195,16 @@ &blsp1_i2c6 {
> > /* TPS61310 Flash/Torch @ 33 */
> > };
> >
> > +&modem {
> > + mx-supply = <&pm8226_l3>;
> > + pll-supply = <&pm8226_l8>;
> > + mss-supply = <&pm8226_s5>;
> > +
> > + firmware-name = "qcom/msm8926/memul/mba.b00", "qcom/msm8926/memul/
modem.mdt";
>
> mbn?
The mba gets loaded with .b00 for some reason, not even the .mdt.
And at least on this device the .mbn doesn't work at all either, but this
might be due to very weird firmware loading on this board - because also for
loading wcnss firmware I needed to add a quite weird hack to make it load.
Modem fortunately loads fine like this.
Regards
Luca
>
> Konrad
>
