Use the header with DSI phy clock IDs to make code more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Depends on: https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 3 ++- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 3 ++- arch/arm64/boot/dts/qcom/sdm845.dtsi | 21 +++++++++++++-------- 3 files changed, 17 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 1cc0f571e1f7f3023efa08adf2791ffce5f2fecf..850c4307cfa903938b56d5805e4e0cf37f565cd5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -559,7 +559,8 @@ &mdss_dsi1 { qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 2391f842c9038a3030511a1c9c8edd31bbacf2b0..11b19613bc0e607df219fe800fe64b660bb6d027 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -499,7 +499,8 @@ &mdss_dsi1 { qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; ports { port@1 { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index e0ce804bb1a35047b092d4745988170738a3cd03..d7fc3d301f64ce64e71921d234c2d1b3a9655d09 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,camcc-sdm845.h> #include <dt-bindings/clock/qcom,dispcc-sdm845.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/clock/qcom,gpucc-sdm845.h> #include <dt-bindings/clock/qcom,lpass-sdm845.h> @@ -4708,8 +4709,10 @@ mdss_dsi0: dsi@ae94000 { "core", "iface", "bus"; - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; @@ -4780,8 +4783,10 @@ mdss_dsi1: dsi@ae96000 { "core", "iface", "bus"; - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; @@ -4975,10 +4980,10 @@ dispcc: clock-controller@af00000 { clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi1_phy 0>, - <&mdss_dsi1_phy 1>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", -- 2.43.0
