Use the header with DSI phy clock IDs to make code more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Depends on: https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 28693a3bfc7fefd883a7dee69a406235317c3047..547bf2a0249fef88d0778a5390cfda76a9d7e4f1 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/clock/qcom,dispcc-sm8250.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-sc8180x.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -3465,10 +3466,10 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sc8180x-dispcc"; reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi1_phy 0>, - <&mdss_dsi1_phy 1>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>, <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&edp_phy 0>, -- 2.43.0
