Use the header with DSI phy clock IDs to make code more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Depends on: https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 4719e1fc70d2cb15a6a63d3e28622ae078a367ef..ede851fbf628428f5740ca8add65ffc05360cc62 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -937,10 +938,10 @@ mmcc: clock-controller@8c0000 { clocks = <&xo_board>, <&gcc GPLL0>, <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi1_phy 1>, - <&mdss_dsi1_phy 0>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, <&mdss_hdmi_phy>; clock-names = "xo", "gpll0", @@ -1071,8 +1072,10 @@ mdss_dsi0: dsi@994000 { "core_mmss", "pixel", "core"; - assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -1139,8 +1142,10 @@ mdss_dsi1: dsi@996000 { "core_mmss", "pixel", "core"; - assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, + <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; phys = <&mdss_dsi1_phy>; status = "disabled"; -- 2.43.0
