Use the header with DSI phy clock IDs to make code more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Depends on: https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/msm8939.dtsi | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 7cd5660de1b33def5b9dc8a0d02583c3eaffb17f..5e8c3ac39de8b1f974a7e1499c7c805f21735569 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -4,6 +4,7 @@ * Copyright (c) 2020-2023, Linaro Limited */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-msm8939.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/interconnect/qcom,msm8939.h> @@ -1172,8 +1173,8 @@ gcc: clock-controller@1800000 { reg = <0x01800000 0x80000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, <0>, <0>, <0>; @@ -1291,8 +1292,8 @@ mdss_dsi0: dsi@1a98000 { "core"; assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -1360,8 +1361,8 @@ mdss_dsi1: dsi@1aa0000 { "core"; assigned-clocks = <&gcc BYTE1_CLK_SRC>, <&gcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; phys = <&mdss_dsi1_phy>; status = "disabled"; -- 2.43.0
